Improvements for v2

Question

ModischFabrications opened this issue 4 years ago · 6 comments

Answer 1 · 2021-12-30T12:45:40.000Z

Don't use GPIO2 / Touch 2, that one seems to be reserved on some boards...

Answer 2 · 2021-12-30T12:52:33.000Z

Touch2/Top seems to be connected to the onboard LED, can't use it for touch. Look for some other pin!
https://github.com/espressif/arduino-esp32/files/1215494/SchematicsforESP32.pdf

Answer 3 · 2021-12-30T12:55:38.000Z

Align PCB differently, Pins sadly collide with frame.

Answer 4 · 2021-12-30T13:03:35.000Z

Seems like left side top 5 are input only and every other is in use already. Left side of HUB75 is therefore fixed.

Might be possible to shift right side around a bit, e.g. by routing GPIO32 from side side and using that ones touch.

Answer 5 · 2022-01-05T21:27:51.000Z

Fuse ~3A,?

Answer 6 · 2023-02-12T19:27:52.000Z

Copy over settings from Easylight, compare fuse against surrounding projects