Issue on Neptune 4

[DNicholai]

Firstly - great software. It works great, from the command line :)

I'm having an issue on a linux based install with a Neptune 4.

Script runs fine when I run it manually in the command line, but when I run it from PrusaSlicer, I get the following error :

_Post-processing script /home/dpegon/SRC/ElegooNeptuneThumbnails-Prusa-1.1.5/dist/ElegooNeptuneThumbnails-Prusa --printer=NEPTUNE4PRO on file /tmp/.PrusaSlicer.upload.8c4e-31dd-d5ae-e39b failed.
Error code: 255
Output:
[104] Error loading Python lib '/tmp/MEIWjUxOl/libpython3.10.so.1.0': dlopen:

I've tried with and without the post command append (--printer=NEPTUNE4PRO)

Any hints?

[Molodos]

I am sorry for the late response. Is this issue stiff present and if not, how did you fix it? (I am asking because I've seen, that you have already made a newer issue, which makes me think, that this problem could be fixed)
Best regards

[DNicholai]

Not fixed through PrusaSlicer, but I'm perfectly happy to do some command line post processing :)

…

On Tue, Nov 21, 2023 at 6:29 PM Michael Weichenrieder < ***@***.***> wrote: I am sorry for the late response. Is this issue stiff present and if not, how did you fix it? (I am asking because I've seen, that you have already made a newer issue, which makes me think, that this problem could be fixed) Best regards — Reply to this email directly, view it on GitHub <#9 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AK7VNJJKA6MLSK7UU25PBULYFTQGBAVCNFSM6AAAAAA7LNKIYSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMRRGM2TMOBYGM> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[Molodos]

I understand, thanks for that info. After some research, this seems to have something to do with your system configuration and not my script. As the issue is not that relevant, I will close it for now, but feel free to reopen it if there is updates :)