Does ATT actually route you your IPv6 address?

Question

Does ATT actually route you your IPv6 address?

MatthewGCampbell opened this issue 4 years ago · 7 comments

Having issues with IPv6, cause it doesn't seem that AT&T routes me my IPv6 WAN address, anyone else have a similar issue?

Answer 1 · 2020-10-20T03:11:32.000Z

Att doesn't seem to assign a routable ipv6 address to the wan adapter with this setup. That said, every other interface and client should be able to get one. I had it functioning well but pulled the plug in ipv6 on my network until I can find time to get pihole etc working.

Answer 2 · 2020-10-20T03:19:26.000Z

Have you tried enabling Request only an IPv6 prefix?

Answer 3 · 2020-10-20T04:40:16.000Z

I was having issues with prefix delegation from pfsense to a router behind it and forgot to have the WAN set to get a prefix from AT&T (kinda stupid of me) but I finally figured it out, if you need any help I might be of assistance.

…

On Oct 19, 2020, at 11:11 PM, Maxfield Allison ***@***.***> wrote: Att doesn't seem to assign a routable ipv6 address to the wan adapter with this setup. That said, every other interface and client should be able to get one. I had it functioning well but pulled the plug in ipv6 on my network until I can find time to get pihole etc working. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

Answer 4 · 2020-10-27T17:28:39.000Z

Yes. I have an ATT ipv6 address. IIRC it took some time for it to percolate through.

My WAN configuration:

My LAN configuration:

Answer 5 · 2020-10-27T17:50:59.000Z

Didn’t have the request prefix box checked cause I thought they actually gave you an address. Thanks

…

On Oct 27, 2020, at 1:28 PM, David Kowis ***@***.***> wrote: Yes. I have an ATT ipv6 address. IIRC it took some time for it to percolate through. My WAN configuration: My LAN configuration: — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

Answer 6 · 2020-11-05T02:54:54.000Z

FYI I've unchecked the prefix only box and received a gateway and IP outside of the prefix subnet. not sure what this means for us since OPNsense ipv6 is being testy as of late but thought i'd share

Answer 7 · 2020-11-05T02:59:31.000Z

Very interesting, I will now be testing this further, but when I had it unchecked for me AT&T wouldn’t actually route the IP to me. Thanks, Matthew

…

On Nov 4, 2020, at 9:55 PM, Maxfield Allison ***@***.***> wrote: FYI I've unchecked the prefix only box and received a gateway and IP outside of the prefix subnet. not sure what this means for us since OPNsense ipv6 is being testy as of late but thought i'd share — You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub, or unsubscribe.