Image file to re-flash EMMC/SD card for Outdoor Miner

[jerryfudd]

Hi,

Trying to troubleshoot a never used outdoor miner and only getting a single red light which resides under the wifi-n adapter on the usb hub riser board. As I understand it as the unit boots I should get multiple lights.

I've checked and the miner isn't grabbing an IP address, powering over poe so the jumper is in the correct position and - yes I do have poe switches. It fails to detect during adding in the Helium app and have also tried holding down the S1 button to get 'a slow flash'.

Ultimately my money at the moment is on that the machine isnt correctly booting.

I would like to re-flash the memory card that plugs into the PI3 compute module riser board to ensure that the machine is actually booting - or atleast apply flash a spare SD card in the first instance to test.

Is this file available so I can apply it to a card with Etcher or a similar SD card writer.

thanks

[vpetersson]

Please contact support@nebra.com. There is no generic image that can be used.