Simple Vesc Display based on esp32
Arduino compatible FW low HW cost (any esp + any display that is supported by the tft library) It was designed on a 2.2" 320x240 ili9341 TESTED on vesc 6.02
It uses : tft_eSPI from https://github.com/Bodmer/TFT_eSPI FlickerFreePrint from https://github.com/KrisKasprzak/FlickerFreePrint VescUart from https://github.com/SolidGeek/VescUart and the old but good EEPROMAnything
Installation :
- copy tft_eSPI into Arduino\libraries\folder (eg. C:\Users\User\Documents\Arduino\libraries\TFT_eSPI)
- copy VESCUART into Arduino\libraries\folder (eg C:\Users\User\Documents\Arduino\libraries\VescUart)
- copy PNGDEC into Arduino\libraries\folder (eg.C:\Users\User\Documents\Arduino\libraries\PNGdec)
- copy FlickerFreePrint into Arduino\libraries\folder (eg: C:\Users\User\Documents\Arduino\libraries\FlickerFreePrint)
ps. im no programmer by any units of measurements. all the code was inspired from roxie and davega