Action required: Greenkeeper could not be activated 🚨

[greenkeeper]

🚨 You need to enable Continuous Integration on Greenkeeper branches of this repository. 🚨

To enable Greenkeeper, you need to make sure that a commit status is reported on all branches. This is required by Greenkeeper because it uses your CI build statuses to figure out when to notify you about breaking changes.

Since we didn’t receive a CI status on the greenkeeper/initial branch, it’s possible that you don’t have CI set up yet.
We recommend using:

• CircleCI
• Travis CI
• Buildkite
• CodeShip
• Azure Pipelines
• TeamCity
• Buddy
• AppVeyor
  But Greenkeeper will work with every other CI service as well.

If you have already set up a CI for this repository, you might need to check how it’s configured. Make sure it is set to run on all new branches. If you don’t want it to run on absolutely every branch, you can whitelist branches starting with greenkeeper/.

Once you have installed and configured CI on this repository correctly, you’ll need to re-trigger Greenkeeper’s initial pull request. To do this, please click the 'fix repo' button on account.greenkeeper.io.

[coderbyheart]

Please excuse the tone in this issue, there is no immediate action needed.

If enabled for this repo Greenkeeper will watch dependencies and create PRs if those change.

If you want this feature, follow the instructions above.

[coderbyheart]

Greenkeeper has been disabled for the NordicPlayground organization and this issue can be closed.