Not working vsh/Launcher/Swttings
Opened this issue · 6 comments
PSP/Vita Model
PSP-3000 (Slim & Bright)
ARK Version
Ark r14
Homebrew/GAME (if applicable)
No response
Plugins ( if applicable )
No response
Steps to reproduce
1.Power on
2.Use dual sd card adapter.
3.Wait to load.
4.All previus installed plugins works.
5.Press select no showing vsh
6.Search for ark swttings and update it doesmt apper.
When i put old mem stick vsh and swttings works, but with dual adapter none.
USB Charge
Disabled
Overclock
Disabled
Power Save
Disabled
Balanced Energy Mode
Disabled
Autoboot Launcher
Off
Disable PSP Go Pause
Off
Unlock Extra Memory
Always
Memory Stick Speedup
Always
Inferno Cache
RR
Skip Sony Logos
Off
Hide PIC0 and PIC1
Off
Hide MAC Address
Off
Hide DLC
Off
Turn off LEDs
Disabled
Verification of form.
- I agree that I properly filled out the items listed above.
This is your adapters issue not ARK-4. I also have a Dual adapter and can only use 1 slot in it or it just breaks.
Yeah dual slot SD adapters are known to be really bad and corrupt your SD cards. I recommend using a single slot adapter.
I always use an two slots adapter on my PSP 2004 with a 32 and a 64 sd cards, for me it is working normally, only in versions 13 and 14 of ARK it occurred to me after update, when starting the PSP it did not show items in the EXTRA tab and it didn't even show the VSH menu when pressing select, but I updated it and on v15 everything is normal again
I always use an two slots adapter on my PSP 2004 with a 32 and a 64 sd cards, for me it is working normally, only in versions 13 and 14 of ARK it occurred to me after update, when starting the PSP it did not show items in the EXTRA tab and it didn't even show the VSH menu when pressing select, but I updated it and on v15 everything is normal again
For me stills doesnt works, i update to newer r15 manually, because the option isnt showing. And still sont show nothin, i use profast dual adapter with 2x64gb.
The games work normally? I haven't tested this when I had a problem, but I remember that after updating, my PSP started with the producer's logos, but I had chosen the options not to show them, I had to turn the PSP off and on again a couple of times to get it back to normal and then I could update via online update... it could be that somehow the ARK save settings are not being loaded... try to copy the ARK save again and if nothing works, then you always have the option to reinstall the official firmware and after reinstall ARK, you can also try installing the full version.
This was an issue introduced in r14, latest pre-release should have fixed it.