[Question]瞄准偏差
Closed this issue · 8 comments
在敌人静止不动时,瞄准位置(头部)总是和实际头部位置错位了一段(偏右),好像没有什么参数能够控制?
在最新V2.3.3(test)测试版中我加入了水平偏移,但是还没添加GUI界面只能通过配置文件进行更改。
参数名:aimOffset_Magnification_x
默认值:0
解释:最左为1,最右为-1,中间(默认)为0,可为小数
例:aimOffset_Magnification_x = 0
还有一件事,似乎控制台输出太多了
我把所有print都注释,还是有输出
Screen Capture FPS: 371
0: 640x640 (no detections), 7.6ms
Speed: 4.1ms preprocess, 7.6ms inference, 25.5ms postprocess per image at shape (1, 3, 640, 640)
这种提示关不掉啊,刷屏了,看不到想要的数据信息
还有一件事,似乎控制台输出太多了 我把所有print都注释,还是有输出
Screen Capture FPS: 371 0: 640x640 (no detections), 7.6ms Speed: 4.1ms preprocess, 7.6ms inference, 25.5ms postprocess per image at shape (1, 3, 640, 640)
这种提示关不掉啊,刷屏了,看不到想要的数据信息
0: 640x640 (no detections), 7.6ms
Speed: 4.1ms preprocess, 7.6ms inference, 25.5ms postprocess per image at shape (1, 3, 640, 640)
这部分是YOLO库中内建的打印,在推理部分加入参数verbose=False
即可关闭
例如:
# 检测和跟踪对象(推理部分)
results = model.predict(frame, save=False, conf=confidence, half=True, agnostic_nms=True, iou=0.7
, classes=[target_selection], device="cuda:0", verbose=False)
还有一件事,似乎控制台输出太多了 我把所有print都注释,还是有输出
Screen Capture FPS: 371 0: 640x640 (no detections), 7.6ms Speed: 4.1ms preprocess, 7.6ms inference, 25.5ms postprocess per image at shape (1, 3, 640, 640)
这种提示关不掉啊,刷屏了,看不到想要的数据信息
0: 640x640 (no detections), 7.6ms
Speed: 4.1ms preprocess, 7.6ms inference, 25.5ms postprocess per image at shape (1, 3, 640, 640)
这部分是YOLO库中内建的打印,在推理部分加入参数verbose=False
即可关闭
例如:# 检测和跟踪对象(推理部分) results = model.predict(frame, save=False, conf=confidence, half=True, agnostic_nms=True, iou=0.7 , classes=[target_selection], device="cuda:0", verbose=False)
好的谢谢
热键要不要加个CTRL,都是鼠标上的键没法映射到键盘(
热键要不要加个CTRL,都是鼠标上的键没法映射到键盘(
计划中了,这个月太忙我抽空或者下个月加上
在主程序中985行处增加
elif key =='ctrl':
lockKey = 0x11
另外建议作者进行ui和主程序的分离
在主程序中985行处增加 elif key =='ctrl': lockKey = 0x11 另外建议作者进行ui和主程序的分离
好的,在考虑重构整个程序,UI改为使用PyQt库,现在这个自己看着都乱XD