Map-based controls do not work
kazooie13 opened this issue · 5 comments
Checklist
- I have updated the card to the latest version available
- I have cleared the cache of my browser
- I have checked if the problem is already reported
The problem
I have a problem with the map based controls. None of them seem to work.
I get the room configuration and can select zones and/or a go to point on the map. After I send the command I only get a "success" pop up, but the command does not reach the robot. It cannot be found in the MQTT logs either.
Everything else works and non-map-based commands are received by the robot.
Map based controls via valentudo webinterface are possible.
What version of a card has described problem?
v2.2.2
What was the last working version card?
No response
What vacuum model do you have problems with?
Roborock S5 / Valentudo 2024.02.0
Which integration do you use to control your vacuum (link)?
https://www.home-assistant.io/integrations/mqtt/
What browser (browsers/apps) does have this problem?
all of them
What version of Home Assistant do you use?
core-2024.2.5
What type of installation are you running?
Home Assistant OS
Card's configuration
type: custom:xiaomi-vacuum-map-card
map_source:
camera: camera.valetudo_s5_XXXX_camera
calibration_source:
camera: true
entity: vacuum.valetudo_XXXX
vacuum_platform: Hypfer/Valetudo
map_locked: false
two_finger_pan: true
map_modes:
- template: vacuum_clean_zone
- template: vacuum_goto
- template: vacuum_clean_segment
predefined_selections:
- id: '16'
icon:
name: mdi:broom
x: 2735
'y': 2360
label:
text: room1
x: 2735
'y': 2360
offset_y: 35
outline:
- - 2625
- 2220
- - 2845
- 2220
- - 2845
- 2500
- - 2625
- 2500
- id: '17'
icon:
name: mdi:broom
x: 2315
'y': 2760
label:
text: room2
x: 2315
'y': 2760
offset_y: 35
outline:
- - 2070
- 2615
- - 2560
- 2615
- - 2560
- 2905
- - 2070
- 2905
- id: '18'
icon:
name: mdi:broom
x: 2342
'y': 2360
label:
text: room3
x: 2342
'y': 2360
offset_y: 35
outline:
- - 2065
- 2110
- - 2620
- 2110
- - 2620
- 2610
- - 2065
- 2610
- id: '19'
icon:
name: mdi:broom
x: 2845
'y': 2575
label:
text: room4
x: 2845
'y': 2575
offset_y: 35
outline:
- - 2700
- 2505
- - 2990
- 2505
- - 2990
- 2645
- - 2700
- 2645
- id: '20'
icon:
name: mdi:broom
x: 2905
'y': 2420
label:
text: room5
x: 2905
'y': 2420
offset_y: 35
outline:
- - 2820
- 2345
- - 2990
- 2345
- - 2990
- 2495
- - 2820
- 2495
- template: vacuum_clean_segment
predefined_selections:
- id: '16'
icon:
name: mdi:broom
x: 2735
'y': 2360
label:
text: room1
x: 2735
'y': 2360
offset_y: 35
outline:
- - 2625
- 2220
- - 2845
- 2220
- - 2845
- 2500
- - 2625
- 2500
- id: '17'
icon:
name: mdi:broom
x: 2315
'y': 2760
label:
text: room2
x: 2315
'y': 2760
offset_y: 35
outline:
- - 2070
- 2615
- - 2560
- 2615
- - 2560
- 2905
- - 2070
- 2905
- id: '18'
icon:
name: mdi:broom
x: 2342
'y': 2360
label:
text: room3
x: 2342
'y': 2360
offset_y: 35
outline:
- - 2065
- 2110
- - 2620
- 2110
- - 2620
- 2610
- - 2065
- 2610
- id: '19'
icon:
name: mdi:broom
x: 2845
'y': 2575
label:
text: room4
x: 2845
'y': 2575
offset_y: 35
outline:
- - 2700
- 2505
- - 2990
- 2505
- - 2990
- 2645
- - 2700
- 2645
- id: '20'
icon:
name: mdi:broom
x: 2905
'y': 2420
label:
text: room5
x: 2905
'y': 2420
offset_y: 35
outline:
- - 2820
- 2345
- - 2990
- 2345
- - 2990
- 2495
- - 2820
- 2495Javascript errors shown in the browser's console (if applicable)
No response
Additional information
No response
Thanks for the quick reply!
Maybe I am misunderstanding something here.
I have added "topic: valetudo/rockrobo" to my configuration, unfortunately it still does not work.
Which topic do you use on your vacuum?
I have found the error, upper/lower case did not match in the configuration i tried. Thanks for your help!
Great 👍