Isolated Can Transceiver Module - ISO 1050 Module
- 1 Mbps
- ESD protection
- Common mode noise filting
- I/O Voltage Range Supports 3.3-V and 5-V Microprocessors
- Meets the Requirements of ISO11898-2(ML: I double this, the chip can but the module....)
- 2500-V(RMS) Isolation
- Fail-Safe Outputs
- Low Loop Delay: 150 ns (Typical), 210 ns(Maximum)
- Bus-Fault Protection of –27 V to 40 V
- Driver (TXD) Dominant Time-out Function
| Pin | Function | Note |
|---|---|---|
| 1 | VCC 1 | Reference to GND 1 |
| 2 | TX | Max 1 Mbps |
| 3 | RX | Max 1 Mbps |
| 4 | GND 1 | GND 1 should not connect to GND 2 |
| 5 | GND 2 | GND 2 should not connect to GND 1 |
| 6 | CAN H | Max speed 1 Mbps |
| 7 | CAN L | Max speed 1 Mbps |
| 8 | VCC 2 | Reference to GND 2 |
