PrintersForAnts/Micron

KGLM-03 adaptation issues

LeoD218 opened this issue · 2 comments

LeoD218 commented

KGLM-03 is too expensive and difficult to buy, can it be adapted to other bearings?

grmocg commented

There is already a non-KGLM-03 option:
[a]_z_joint_printed_alternative_x4.stl

  • 👍1
hartk1213 commented

KGLM-03 is too expensive and difficult to buy, can it be adapted to other bearings?

As stated above there is a printed only option.. going to close this issue