PrintersForAnts/Micron

(R1 Beta) Enhancement/Fix XY joints cad the holes need adjustment for pin & add recesses for MR63-RS bearings

Closed this issue · 3 comments

The plastic tweaks when fully tightened with pin inserted in the toothed pulley spot.
If you could make that version accept MR63-RS 3mm ID x 6mm OD x 2.5mm thick bearings could use a live shaft setup and get away from the awful bearing in the toothed pulleys this would be much better option.

which toothed pulleys would you want to use on those live shafts? screenshots, images, etc.. would be helpful
i have looked into this many times and its pretty tight spacing

CAD is available and at this time I don't plan on making this change