Missing some STL's for Stealthburner
DaveyRance opened this issue · 4 comments
The following STL's seem to be missing for a complete Mini Stealthburner.
https://github.com/VoronDesign/Voron-0/blob/Voron0.2/STLs/Toolheads/Mini_Stealthburner/%5Ba%5D_MiniSB_Motor_Plate_x1.stl
https://github.com/VoronDesign/Voron-0/blob/Voron0.2/STLs/Toolheads/Mini_Stealthburner/Strain_Relief_Spacer_x2.stl
https://github.com/VoronDesign/Voron-0/blob/Voron0.2/STLs/Toolheads/Mini_Stealthburner/Strain_Relief_Body_x1.stl
https://github.com/VoronDesign/Voron-0/blob/Voron0.2/STLs/Toolheads/Mini_Stealthburner/%5Ba%5D_Guidler_x1.stl
https://github.com/VoronDesign/Voron-0/blob/Voron0.2/STLs/Toolheads/Mini_Stealthburner/%5Ba%5D_Latch_x1.stl
https://github.com/VoronDesign/Voron-0/blob/Voron0.2/STLs/Toolheads/Mini_Stealthburner/%5Ba%5D_Shuttle_x1.stl
https://github.com/VoronDesign/Voron-0/blob/Voron0.2/STLs/Toolheads/Mini_Stealthburner/%5Ba%5D_MiniSB_MidBody_x1.stl
This seems to be a repeat of the issue
#49
Yeah I can get those added soon, I was waiting for v0.2r1 to get released 👍
This was resolved with the R1 MiniSB files 👍🏻
Looks good. Was there a changelog for what changed with MiniSB R1 as my searching is failing me. (want to figure is it worth re-printing)
Incase anyone else is looking from the v0.2R1 Release notes
Toolhead
Mini Stealthburner direct drive and bowden cowling part cooling ducts improved
an issue with the guidler being able to pivot in an undesired direction was addressed by tightening the bolt holes to reduce play
RIDGA support for the bearings that come stock with the ridga kit has been added