Second system

Question

Second system

Closed this issue 2 years ago · 7 comments

I have two SolarEdge inverters.
Site-id is not the same.
Is it possible to add a second system?
I want to see the optimizer information from both systems.

Answer 1 · 2023-02-27T09:49:56.000Z

Im not sure what happens. I think it will work, but i did not prepared the naming of the sensors for this case. I will try to test it.. ;-)

Answer 2 · 2023-02-27T10:25:39.000Z

It should work, the sensors are getting a unique_id based on the serial number.

Let me know if it worked!

Answer 3 · 2023-02-27T14:04:11.000Z

Every inverter has it own api and site-id.
Also the password is not the same.
But I can only fill in one.
There is no option for the second one.

Answer 4 · 2023-02-27T14:41:31.000Z

You can just add an other instance of the same integration. Just add it again in HA en fill in the other side-id. This should work i think. The main problem could be the sensor names, but as far as unique-id's, that is using the serial number of the panel, so it should be unique even when using 2 systems.

Answer 5 · 2023-03-05T19:10:31.000Z

@scannie67 Did it work?

Answer 6 · 2023-03-05T20:35:57.000Z

I donn’t know. The SolarEdge inverter is defective at this moment. After repair I try again. Op 5 mrt. 2023 om 20:10 heeft ProudElm ***@***.***> het volgende geschreven: @scannie67 Did it work? —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: ***@***.***>

Answer 7 · 2023-03-06T07:47:44.000Z

Ai, i'm sorry to hear that. Good luck with the repairs.