QMAPP-mq/qudi

Issues

• Load ROI fails if POI names have spaces

  #53 opened 6 years ago by latchr
  0

• powersupply should go to remote mode on activate

  #52 opened 6 years ago by mvbnano
  0

• Can properties accept additional arguments?

  #51 opened 6 years ago by mvbnano
  0

• create red pitaya hardware module

  #37 opened 6 years ago by mvbnano
  5

• increase winspec module functionality

  #36 opened 7 years ago by mvbnano
  0

• make scanner_motor_interfuse read dwell delay and dwell count bins from config file

  #50 opened 6 years ago by latchr
  0

• Clean and review dev_newfocus_screws

  #49 opened 6 years ago by latchr
  0

• Review dev_triggered_counter

  #48 opened 6 years ago by latchr
  0

• Test dev_scanline_mod branch on conventional hardware

  #47 opened 6 years ago by latchr
  0

• Review dev_trig_scan_count_interfuse branch

  #46 opened 6 years ago by latchr
  0

• Review dev_red_pitaya branch

  #45 opened 6 years ago by latchr
  0

• unlock / lock the M Squared etalon upon wavelength change

  #40 opened 6 years ago by mvbnano
  1

• Error using time tagger with 1 APD

  #44 opened 6 years ago by MJoliffe
  0

• Create "triggered counter"

  #43 opened 6 years ago by latchr
  2

• consolidate timetagger development

  #42 opened 6 years ago by mvbnano
  2

• create powermeter gui

  #18 opened 7 years ago by mvbnano
  7

• docstring formatting

  #30 opened 6 years ago by mvbnano
  1

• ntmdt.getConfiguration() behaves different on different machines

  #38 opened 6 years ago by mvbnano
  10

• Confocal scanner GUI scan actions do not match scan state for slow hardware

  #41 opened 6 years ago by latchr
  0

• When Scan is done in Confocal needs to send tag.

  #24 opened 7 years ago by MyrddynEmrys
  0

• obis com port should be loaded from the config

  #35 opened 6 years ago by mvbnano
  3

• _do_move_abs not connected?

  #16 opened 6 years ago by mvbnano
  5

• bring piezo screws constraints management inline with best practice

  #28 opened 7 years ago by mvbnano
  2

• ntmdt stage xy movement generates MANY warnings

  #39 opened 6 years ago by mvbnano
  6

• Verify Nova Px VB Script Commands

  #20 opened 7 years ago by mvbnano
  9

• NT-MDT positions sometimes returned as 0.0

  #27 opened 7 years ago by mvbnano
  3

• load axis channels from configuration

  #29 opened 7 years ago by mvbnano
  4

• complete development of coherent obis hardware module

  #33 opened 7 years ago by mvbnano
  3

• pyusb

  #22 opened 7 years ago by mvbnano
  3

• create tunable laser interface

  #34 opened 7 years ago by mvbnano
  1

• Add git branch, commit, and config file as metadata in saved file headers.

  #32 opened 7 years ago by latchr
  0

• Add ability to reset sample shift without starting a new ROI

  #12 opened 7 years ago by latchr
  0

• Add display of total time length to counter GUI

  #19 opened 7 years ago by MyrddynEmrys
  7

• create tunable laser interface

  #31 opened 7 years ago by mvbnano
  0

• figure how to init New Focus screw positions

  #21 opened 7 years ago by mvbnano
  2

• only get constraints on start-up

  #17 opened 7 years ago by mvbnano
  1

• Universal motion abort button

  #26 opened 7 years ago by BGNorton
  1

• Clean all modules button

  #25 opened 7 years ago by MyrddynEmrys
  0

• Add loaded icon for hardware modules

  #23 opened 7 years ago by BGNorton
  4

• consider setting .dll filenames in the config file

  #15 opened 7 years ago by mvbnano
  5

• create hardware module for the PI E-761

  #14 opened 7 years ago by mvbnano
  1

• pyVISA error triggered by setting the pm100 averaging window

  #8 opened 7 years ago by mvbnano
  5

• remove commented legacy code from m squared hardware module

  #10 opened 7 years ago by mvbnano
  1

• useless warning triggered

  #11 opened 7 years ago by mvbnano
  3

• loading multiple powermeters but all connect to the same powermeter

  #13 opened 7 years ago by mvbnano
  3

• POImanager still has "optimise" in the method names whereas the UI vocab is "refind"

  #5 opened 7 years ago by latchr
  0

• setting the M Squared wavelength no longer working

  #9 opened 7 years ago by mvbnano
  2

• PI stage interfuse doesn't work if the counter is stopped

  #4 opened 7 years ago by latchr
  0

• changing the wavelength of the M Squared resets the beam alignment to default

  #7 opened 7 years ago by mvbnano
  1

• set_wavelength in m2 laser module is broken

  #3 opened 7 years ago by latchr
  4