Vumeter not working

[Stevelande]

Sorry for my bad English
I set it up on Ubuntu
I dont understand what's wrong in my Config.

**** Liste der Hardware-Geräte (PLAYBACK) **** Karte 0: Loopback [Loopback], Gerät 0: Loopback PCM [Loopback PCM] Sub-Geräte: 8/8 Sub-Gerät #0: subdevice #0 Sub-Gerät #1: subdevice #1 Sub-Gerät #2: subdevice #2 Sub-Gerät #3: subdevice #3 Sub-Gerät #4: subdevice #4 Sub-Gerät #5: subdevice #5 Sub-Gerät #6: subdevice #6 Sub-Gerät #7: subdevice #7 Karte 0: Loopback [Loopback], Gerät 1: Loopback PCM [Loopback PCM] Sub-Geräte: 8/8 Sub-Gerät #0: subdevice #0 Sub-Gerät #1: subdevice #1 Sub-Gerät #2: subdevice #2 Sub-Gerät #3: subdevice #3 Sub-Gerät #4: subdevice #4 Sub-Gerät #5: subdevice #5 Sub-Gerät #6: subdevice #6 Sub-Gerät #7: subdevice #7 Karte 1: MID [HDA Intel MID], Gerät 0: ALC269 Analog [ALC269 Analog] Sub-Geräte: 1/1 Sub-Gerät #0: subdevice #0 Karte 2: HDMI [HDA ATI HDMI], Gerät 3: HDMI 0 [HDMI 0] Sub-Geräte: 1/1 Sub-Gerät #0: subdevice #0
.asoundrc
`pcm.!default {
type asym
playback.pcm "alsa_sink"
capture.pcm "alsa_monitor"
}

pcm.alsa_sink {
type plug
slave {pcm "multi_dev"}
route_policy "duplicate"
}

pcm.alsa_monitor {
type plug
slave {pcm "hw:Loopback,1,0"}
}

pcm.multi_dev {
type multi

slaves.a.pcm "hw:1,0" # Match this to your sound card (aplay -l)
slaves.a.channels 2
slaves.b.pcm "hw:Loopback,0,0"
slaves.b.channels 2

bindings.0.slave a
bindings.0.channel 0
bindings.1.slave a
bindings.1.channel 1
bindings.2.slave b
bindings.2.channel 0
bindings.3.slave b
bindings.3.channel 1
}
python main.py --gui --json --host=192.168.1.139 --effect vumeter --config=/home/ganja/Downloads/hyperion.config.json
/home/ganja/Downloads/hyperion mpd/hyperion-audio-effects-master/effects/spectrum_dump.py:21: PyGIWarning: Gst was imported without specifying a version first. Use gi.require_version('Gst', '1.0') before import to ensure that the right version gets loaded.
from gi.repository import GObject, Gst, GLib
Effect: VU meter

Left leds:
[74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93]
Right leds:
[38, 37, 36, 35, 34, 33, 32, 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19]
Effect started, waiting for gstreamer messages...
`
I have chance the Vumeter.json
{
"name" : "VU Meter",
"script" : "vumeter.py",
"args" :
{
"color-start": "#00FF00",
"color-end": "#FF0000",
"level-min": 0,
"level-max": 100,
"left-start": null,
"left-end": null,
"right-start": null,
"right-end": null,
"interval": 50
}
}

2 Led's color is green but nothing Led's switch the Color.

Please can you help me?

[Stevelande]

It runs. Just had to change only in pavcontrol on monitor the sound card