Rocco83/bell-controller

Church bell controller

# Bell Controller

A bell controller, designed for church

This software has been tested on Debian Bullseye, on a Raspberry PI 3, using python 3.9.

Packages needed

• python3 (main debian repository)
• python3-rpi.gpio (main raspbian repository)
• python3-pygame

To be checked for other dependencies.

Instructions

General informations

• this daemon is tested in /usr/local/bell-controller directory.
• Sounds to be played have to be placed in sound/ directory. Files inside need to have no spaces or other non ASCII character into the file name.
• The file can be played also from external sources using the fifo created by the daemon.
• Pinout description can be found in the official web site https://www.raspberrypi.org/documentation/usage/gpio-plus-and-raspi2/ or in a more clean way in https://github.com/Dot-and-Net/IoTHelpers/wiki/Raspberry-Pi-2-and-3-Pinout

More information about the expected behavior are in info.md

Autostart as a service

1. put the repository on /usr/local/bell-controller
2. copy the bell-controller.service file into /etc/systemd/system/bell-controller.service
3. run systemctl enable bell-controller.service

Play file from an external source

The fifo is hardcoded into /var/run/bell.fifo

In order to play one file, simply put into the pipe the filename you want to play.

The file name will be looked into sound/ directory and played if exists.

Customization of the daemon

Current pins are hardcoded

function	pin number	Pin definition
Play "FESTA"	11	GPIO 17
Play "FUNERALE"	13	GPIO 27
Play "ORA_PIA"	15	GPIO 22
Stop all play	33	GPIO 13
shutdown	35	GPIO 19

Currently filename are hardcoded and bonded to one GPIO.

  * GPIO 17: "1-FESTA.wav",
  * GPIO 27: "2-FUNERALE.wav",
  * GPIO 22: "3-ORA_PIA.wav",```

Other current hardware link

Item	function	pin number	Pin definition
Coupling circuit	power	4	5V
Coupling circuit	GND	6	GND
Relais	power	2	5V
Relais	GND	9	GND
Relais	switch	37	GPIO 26
LED Raspberry	power	4	GPIO 4
LED Raspberry	GND	20	GND

The Raspberry LED will shut down on bell-controller shutdown. The other pin will be always powered, linking to 3,3 PWR will therefore keep the led always on.

Hardware structure

There are two main component outside raspberry.

1. One coupling circuit. This include optocoupler to separate the power from the button/other thing to raspberry.
2. One relais circuit. The one used is like http://www.sainsmart.com/arduino-pro-mini.html

TODO

Web interface

A web interface is welcome to change the cron

Privilege sepaeration

The root user is not really needed to run this software. Especially if the web server has to be implemented to change the cron.

Definition of GPIO and functions in a json/xml/... file

The code should be clean from the hardcoded pin