ESP AudioKit I2S port 0 has not installed
romakrau opened this issue · 4 comments
Hi all,
I will use this software as a satellite for Rhasspy on a FHEM smart home server.
I had compiled and installed the software with PlatformIO and got this output:
rst:0x1 (POWERON_RESET),boot:0x1f (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0030,len:1184 load:0x40078000,len:12776 load:0x40080400,len:3032 entry 0x400805e4 Booting Identifying Codec... Checking for ES8388 Pinout Variant 1... Checking for ES8388 Pinout Variant 2... Found audio controller ES8388 Pinout Variant 2 at SDA: 33 / SCL: 32 Loading configuration Failed to read file, using default configuration Creating I2Stask Enter WifiDisconnected Enter WifiConnected Connected to Wifi with IP: 192.168.xxx.xxx, SSID: xxxx BSSID: xxxxxxxxxxxxxxxxxxxx, RSSI: -60 Enter MQTTDisconnected Connecting MQTT: 192.168.xxx.xxx, 1883 Enter MQTTConnected Connected as ESPAudiokitFlur Connected to asynch MQTT! Enter Idle InitI2SSpeakerOrMic -> Mic E (2409) I2S: i2s_driver_uninstall(1999): I2S port 0 has not installed
What does it mean " I2S port 0 has not installed"?
What about the settings?
hostname=192.168.xxx.xxx ; The Adress by what?
deployhost=192.168.187.76 ; Only used by matrix?
Thank you for helping me
Greetings Roman
EDIT: I have a ESP32 Audio Kit V2.2 A237
Hello!
(2409) I2S: i2s_driver_uninstall(1999): I2S port 0 has not installed
It's not a problem. This is an informational message. After that, the device waits for the command via the microphone.
hostname=192.168.xxx.xxx ; The Adress by what?
this will be the ip of the device if you set te network to fixed
deployhost=192.168.187.76 ; Only used by matrix?
yes, that is the ip of the pi on which the matrix is attached (only required on first flash)