Matrix Voice 1 panic'ed (IntegerDivideByZero)
Opened this issue · 2 comments
Following the Readme I uploaded the firmware to my matrix voice. Connected with minicom to /dev/ttyS0 it shows a reboot loop with the following output:
`LF file SHA256: 0000000000000000
Rebooting...
I (10) boot: ESP-IDF v3.1 2nd stage bootloader
I (10) boot: compile time 11:08:24
I (10) boot: Enabling RNG early entropy source...
I (14) boot: SPI Speed : 40MHz
I (18) boot: SPI Mode : DIO
I (22) boot: SPI Flash Size : 4MB
I (26) boot: Partition Table:
I (29) boot: ## Label Usage Type ST Offset Length
I (37) boot: 0 nvs WiFi data 01 02 00009000 00005000
I (44) boot: 1 otadata OTA data 01 00 0000e000 00002000
I (52) boot: 2 app0 OTA app 00 10 00010000 001e0000
I (59) boot: 3 app1 OTA app 00 11 001f0000 001e0000
I (67) boot: 4 eeprom Unknown data 01 99 003f0000 00001000
I (74) boot: 5 spiffs Unknown data 01 82 003f1000 0000f000
I (82) boot: End of partition table
I (86) esp_image: segment 0: paddr=0x00010020 vaddr=0x3f400020 size=0x38800 (231424) map
I (176) esp_image: segment 1: paddr=0x00048828 vaddr=0x3ffbdb60 size=0x05a58 ( 23128) load
I (185) esp_image: segment 2: paddr=0x0004e288 vaddr=0x40080000 size=0x01d90 ( 7568) load
I (188) esp_image: segment 3: paddr=0x00050020 vaddr=0x400d0020 size=0xce040 (843840) map
I (489) esp_image: segment 4: paddr=0x0011e068 vaddr=0x40081d90 size=0x13234 ( 78388) load
I (522) esp_image: segment 5: paddr=0x001312a4 vaddr=0x50000200 size=0x00010 ( 16) load
I (535) boot: Loaded app from partition at offset 0x10000
I (535) boot: Disabling RNG early entropy source...
Booting
Matrix Voice Initialized
Guru Meditation Error: Core 1 panic'ed (IntegerDivideByZero). Exception was unhandled.
Core 1 register dump:
PC : 0x400dac29 PS : 0x00060330 A0 : 0x800dac94 A1 : 0x3ffb26b0
A2 : 0x3ffbb9e4 A3 : 0x3ffbb9e4 A4 : 0x00000000 A5 : 0xffffffbf
A6 : 0xffffffdf A7 : 0x3ffb9374 A8 : 0x00000000 A9 : 0x00000000
A10 : 0x00000000 A11 : 0x00000001 A12 : 0x3ffb26bc A13 : 0x00000004
A14 : 0x00000000 A15 : 0x00000000 SAR : 0x00000018 EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x40089ee9 LEND : 0x40089f0b LCOUNT : 0xffffffff
Backtrace:0x400dac26:0x3ffb26b00x400dac91:0x3ffb26e0 0x400d305f:0x3ffb2760 0x400d8062:0x3ffb27a0 0x400ef56e:0x3ffb2820`
This is my settings.ini:
`[General]
hostname=192.168.2.195
deployhost=192.168.2.103
siteId=satellite
;supported: M5ATOMECHO=0, MATRIXVOICE=1, AUDIOKIT=2, INMP441=3, INMP441MAX98357A=4, ESP32_POE_ISO=5, TAUDIO=6, INMP441MAX98357AFASTLED=7
device_type=1
;network_type: 0: WiFi, 1: Ethernet
network_type=0
[Wifi]
ssid=MY_SSID
;ssid=MY_PASSWORD
password=MY_PW
;scanStrongestAP=true ; use if device connects to a non-optimal AP
;uncomment next 4 lines and fill with your own values if you want to use a static ip address
;ip=192.168.xxx.xxx
;gateway=192.168.xxx.xxx
;subnet=255.255.255.0
;dns1=192.168.xxx.xxx
;optional: second dns server
;dns2=192.168.xxx.xxx
[OTA]
;supported: upload, ota, matrix
;-upload: device should be attached to computer via usb
;-ota: will use espota
;-matrix: matrix voice should be attached to a raspberry pi with matrix software.
; deployhost should be set to ip of the pi
method=ota
password=DiesPfO!2022
port=3232
[MQTT]
hostname=MY_IP
port=1883
username=MY_USERNAME
password=MY_PASSWORD`
To setup the environment on the PI I have used this repo https://github.com/qnlbnsl/Matrix-IO since the matrix.io repos are offline. (See separate issue to add a hint to your Readme file for that).
Is the hostname in the MQTT section your IP or the value MY_IP?
Don't know if that is the issue by the way.
And maybe edit you passwords out ;)
Good tip :-) (passwords)
The hostnae is my mqtt ip address.