Elogind User, Seat and Session Manager
Introduction
Elogind is the systemd project's "logind", extracted out to be a standalone daemon. It integrates with PAM to know the set of users that are logged in to a system and whether they are logged in graphically, on the console, or remotely. Elogind exposes this information via the standard org.freedesktop.login1 D-Bus interface, as well as through the file system using systemd's standard /run/systemd layout. Elogind also provides "libelogind", which is a subset of the facilities offered by "libsystemd". There is a "libelogind.pc" pkg-config file as well.
All of the credit for elogind should go to the systemd developers.
For more on systemd, see
http://www.freedesktop.org/wiki/Software/systemd
All of the blame should go to Andy Wingo, who extracted elogind
from systemd.
All complaints should go to Sven Eden, who is maintaining elogind.
Build Status
Listed are the master branch and the last stable branch
Contributing
Elogind was branched from systemd version 219, and preserves the git history of the systemd project. The version of elogind is the upstream systemd version, followed by the patchlevel of elogind. For example version 219.12 is the twelfth elogind release, which aims to provide a subset of the interfaces of systemd 219.
To contribute to elogind, fork the current source code from github:
https://github.com/elogind/elogind
Send a pull request for the changes you like.
If you do not have a github account, the elogind wiki page at
https://github.com/elogind/elogind/wiki
lists further possibilities to contact the maintainers.
To chat about elogind: #elogind on freenode
A forum subsection has been set up for elogind at
https://forums.prydeworx.com
where you can register/login with your GitLab/GitHub account.
Finally, bug reports: https://github.com/elogind/elogind/issues
Why bother?
Elogind has been developed for use in GuixSD, the OS distribution of GNU Guix. See http://gnu.org/s/guix for more on Guix. GuixSD uses a specific init manager (GNU Shepherd), for reasons that are not relevant here, but still aims to eventually be a full-featured distribution that can run GNOME and other desktop environments. However, to run GNOME these days means that you need to have support for the login1 D-Bus interface, which is currently only provided by systemd. That is the origin of this project: to take the excellent logind functionality from systemd and provide it as a standalone package.
You're welcome to use elogind for whatever purpose you like -- as-is, or as a jumping-off point for other things -- but please don't use it as part of some anti-systemd vendetta. We are appreciative of the systemd developers logind effort and think that everyone deserves to run it if they like. No matter what kind of PID1 they use.
Differences relative to systemd
The pkg-config file is called libelogind, not libsystemd or libsystemd-logind.
The headers are in <elogind/...>
, like <elogind/sd-login.h>
instead of <systemd/sd-login.h>
.
To make it easier for projects to add support for elogind, there is a
subfolder "systemd" in the elogind include directory. So if
pkg-config
is used to get the cflags, including
<systemd/sd-login.h>
will still work.
Libelogind just implements login-related functionality. It also provides the sd-bus API.
Unlike systemd, whose logind arranges to manage resources for user sessions via RPC calls to systemd, in elogind there is no systemd so there is no global cgroup-based resource management. This has a few implications:
- Elogind does not create "slices" for users. Elogind will not record that users are associated with slices.
- The /run/systemd/slices directory will always be empty.
- Elogind does not have the concept of a "scope", internally, as it's the same as a session. Any API that refers to scopes will always return an error code.
On the other hand, elogind does use a similar strategy to systemd in that it places processes in a private cgroup for organizational purposes, without installing any controllers (see http://0pointer.de/blog/projects/cgroups-vs-cgroups.html). This allows elogind to map arbitrary processes to sessions, even if the process does the usual double-fork to be reparented to PID 1.
Elogind does not manage virtual terminals.
Elogind does monitor power button and the lid switch, like systemd,
but instead of doing RPC to systemd to suspend, poweroff, or restart
the machine, elogind just does this directly. For suspend, hibernate,
and hybrid-sleep, elogind uses the same code as systemd-sleep.
Instead of using a separate sleep.conf file to configure the sleep
behavior, this is included in the [Sleep] section of
/etc/elogind/login.conf
. See the example login.conf
for more.
For shutdown, reboot, and kexec, elogind shells out to halt
,
reboot
and kexec
binaries.
The loginctl command has the poweroff
, reboot
, suspend
,
hibernate
, hybrid-sleep
and suspend-then-hibernate
commands
from systemd, as well as the --ignore-inhibitors
flag.
The PAM module is called pam_elogind.so
, not pam_systemd.so
.
Elogind and the running cgroup controller
While meson
runs, it will detect which controller is in place.
If no controller is in place, configure will determine, that elogind
should be its own controller, which will be a very limited one.
This approach should generally work, but if you just have no cgroup controller in place, yet, or if you are currently switching to another one, this approach will fail.
In this case you can do one of the two following things:
- Boot your system with the target init system and cgroup controller, before configuring and building elogind, or
- Use the
--with-cgroup-controller=name
option.
Example: If you plan to use openrc, but openrc has not yet booted
the machine, you can use
--with-cgroup-controller=openrc
to let elogind know that openrc will be the controller
in charge.
However, if you set the controller at configure time to something different than what is in place, elogind will not start until that controller is actively used as the primary controller.
ABI compatibility with libsystemd
Basically all symbols are included. But any API calls that require to call systemd, or need internal knowledge of systemd, are simple stubs. They are there to provide ABI compatibility, but will not work.
One exception is sd_is_mq()
that is found in sd-daemon.h. This is the
only place using POSIX message queues, which would add further
dependencies. As those would be completely unused in the rest of
elogind, this function is also a stub, always returning 0.
License
LGPLv2.1+ for all code
- except
src/basic/MurmurHash2.c
which is Public Domain - except
src/basic/siphash24.c
which is CC0 Public Domain
Dependencies
- glibc >= 2.16 (or musl-libc >= 1.1.20)
- libcap
- libmount >= 2.27.1 (from util-linux)
(util-linux < 2.29 must be built with
--enable-libmount-force-mountinfo
, and later versions without--enable-libmount-support-mtab
.) - libseccomp >= 2.3.1 (optional)
- libblkid >= 2.24 (from util-linux) (optional)
- PAM >= 1.1.2 (optional)
- libacl (optional)
- libselinux (optional)
- libpython (optional)
- pkg-config
- gperf >= 3.1
- docbook-xsl (optional, required for documentation)
- xsltproc (optional, required for documentation)
- python-lxml (optional, required to build the indices)
- python, meson, ninja
- gcc, awk, sed, grep, m4, and similar tools
During runtime, you need the following additional dependencies:
- util-linux >= v2.27.1 required
- dbus >= 1.9.14 (strictly speaking optional, but recommended) NOTE: If using dbus < 1.9.18, you should override the default policy directory (--with-dbuspolicydir=/etc/dbus-1/system.d).
- PolicyKit (optional)
To build in directory build/:
meson build/ && ninja -C build
Any configuration options can be specified as -Darg=value... arguments
to meson. After the build directory is initially configured, the configuration
can be changed with:
meson configure -Darg=value... build/
meson configure
without any arguments will print out available options and
their current values.
Useful commands:
ninja -v some/target
ninja test
sudo ninja install
DESTDIR=... ninja install
A tarball can be created with:
git archive --format=tar --prefix=elogind-241/ v241 | xz > elogind-241.tar.xz