seems to be over retracting without marker

Question

seems to be over retracting without marker

Closed this issue 4 years ago · 5 comments

when there's no marker an its extruding the retracts are longer then the detracts. may vary on the retraction during painting value. still trying to find exact cause...

Answer 1 · 2021-08-12T04:55:25.000Z

retraction during painting = 0 did not help this.

Answer 2 · 2021-08-12T06:34:44.000Z

Hi, there was a new pull request for the cura Profile which should fix this. You can redownload and Import the Profile or just disable "retract on layer change" in cura.

Answer 3 · 2021-08-12T17:02:02.000Z

tried turning off "retract on layer change" but still having the problem. also there are z-hops when z-hop is disabled. another problem is M900 for linear advance on each tool. should be only one tool.
gcode.txt

Answer 4 · 2021-08-12T17:09:20.000Z

oh I forgot to mention, sometimes it would print slow but sometimes fast. varying feedrate?

Answer 5 · 2021-08-12T17:46:58.000Z

hay! randomly started working. I think it was the wall count?? the M900 is still a problem though. I'll post separate issue. although not effecting print quality so far and no warnings.