after slicing the model doesnt merge , but shows normal in slice sim. not gcode4.
Opened this issue · 2 comments
howy123 commented
I followed all instructions and it does work BUT doesnt slice right. When i slice a multi color model in cura of coarse, it slices fine i can set any extruder i want and it slices the way it should but after i put the file on sd I saw the model was split up again in random places even tho I checked the slice in the sim and its fine. when i look at g-code its split up. why is this ? I see others on youtube using this mod and it works. It retrieves pen just fine , just does something to gcode wrong . Ive tried reinstalling cura 4.11.0 and same issue still.
any help please.......
Sakati84 commented
What you see in the preview are probably the gcode paths for the pens. Did you try printing the model?
howy123 commented
I played with the offsets and it looks good I haven't had time to test it
yet. It was doing a weird thing it would split my sliced model in to 2
parts. I am starting the settings on 0 and work my way to the correct
offset cause my measurements were prob not right. Thank you for the
reply.....
…On Tue, Nov 2, 2021, 6:52 AM Sakati84 ***@***.***> wrote:
What you see in the preview are probably the gcode paths for the pens. Did
you try printing the model?
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#78 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AJUQLI5IAKSKL4255H7Z7W3UJ67G3ANCNFSM5HBNDK4Q>
.
Triage notifications on the go with GitHub Mobile for iOS
<https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675>
or Android
<https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>.