SamsamBabadi/tus-php

🚀 A pure PHP server and client for the tus resumable upload protocol v1.0.0

TusPHP

Resumable file upload in PHP using tus resumable upload protocol v1.0.0

Medium Article ⚡ Laravel & Lumen Integration ⚡ Symfony Integration ⚡ CakePHP Integration ⚡ WordPress Integration

tus is a HTTP based protocol for resumable file uploads. Resumable means you can carry on where you left off without re-uploading whole data again in case of any interruptions. An interruption may happen willingly if the user wants to pause, or by accident in case of a network issue or server outage.

Table of Contents

• Installation
• Usage
  • Server
    • Nginx
    • Apache
  • Client
• Extension support
  • Expiration
  • Concatenation
• Events
  • Responding to an Event
• Middleware
  • Creating a Middleware
  • Adding a Middleware
  • Skipping a Middleware
• Compatible with Uppy
• Setting up a dev environment and/or running examples locally
  • Docker
  • Kubernetes with minikube
• Contributing
• Questions about this project?
• Supporters

Installation

Pull the package via composer.

$ composer require ankitpokhrel/tus-php

Usage

Basic Tus Architecture

Server

This is how a simple server looks like.

// server.php

$server   = new \TusPhp\Tus\Server('redis'); // Leave empty for file based cache
$response = $server->serve();

$response->send();

exit(0); // Exit from current PHP process.

You need to rewrite your server to respond to a specific endpoint. For example:

Nginx

# nginx.conf

location /files {
    try_files $uri $uri/ /server.php?$query_string;
}

Apache

# .htaccess

RewriteEngine on

RewriteCond %{REQUEST_FILENAME} !-f
RewriteRule ^files/?(.*)?$ /server.php/$1 [QSA,L]

Default max upload size is 0 which means there is no restriction. You can set max upload size as described below.

$server->setMaxUploadSize(100000000); // 100 MB in bytes

Default redis and file configuration for server and client can be found inside config/server.php and config/client.php respectively. To override default config you can simply copy the file to your preferred location and update the parameters. You then need to set the config before doing anything else.

\TusPhp\Config::set(<path to your config>);

$server = new \TusPhp\Tus\Server('redis');

Alternately, you can set REDIS_HOST, REDIS_PORT and REDIS_DB env in your server to override redis settings for both server and client.

Client

The client can be used for creating, resuming and/or deleting uploads.

$client = new \TusPhp\Tus\Client($baseUrl);

// Optional. If key is not set explicitly, the system will generate an unique uuid.
$key = 'your unique key';

$client->setKey($key)->file('/path/to/file', 'filename.ext');

// Create and upload a chunk of 1MB
$bytesUploaded = $client->upload(1000000);

// Resume, $bytesUploaded = 2MB
$bytesUploaded = $client->upload(1000000);

// To upload whole file, skip length param
$client->file('/path/to/file', 'filename.ext')->upload();

To check if the file was partially uploaded before, you can use getOffset method. It returns false if the upload isn't there or invalid, returns total bytes uploaded otherwise.

$offset = $client->getOffset(); // 2000000 bytes or 2MB

Delete partial upload from the cache.

$client->delete($key);

By default, the client uses /files as an API path. You can change it with setApiPath method.

$client->setApiPath('/api');

By default, the server will use sha256 algorithm to verify the integrity of the upload. If you want to use a different hash algorithm, you can do so by using setChecksumAlgorithm method. To get the list of supported hash algorithms, you can send OPTIONS request to the server.

$client->setChecksumAlgorithm('crc32');

Extension support

• The Creation extension is mostly implemented and is used for creating the upload. Deferring the upload's length is not possible at the moment.
• The Termination extension is implemented which is used to terminate completed and unfinished uploads allowing the Server to free up used resources.
• The Checksum extension is implemented, the server will use sha256 algorithm by default to verify the upload.
• The Expiration extension is implemented, details below.
• This Concatenation extension is implemented except that the server is not capable of handling unfinished concatenation.

Expiration

The Server is capable of removing expired but unfinished uploads. You can use the following command manually or in a cron job to remove them.

$ ./vendor/bin/tus tus:expired --help

Usage:
  tus:expired [<cache-adapter>] [options]

Arguments:
  cache-adapter         Cache adapter to use, redis or file. Optional, defaults to file based cache. [default: "file"]

Options:
  -c, --config=CONFIG   File to get config parameters from.

eg:

$ ./vendor/bin/tus tus:expired redis

Cleaning server resources
=========================

1. Deleted 1535888128_35094.jpg from /var/www/uploads

You can use--config option to override default redis or file configuration.

$ ./vendor/bin/tus tus:expired redis --config=<path to your config file>

Concatenation

The Server is capable of concatenating multiple uploads into a single one enabling Clients to perform parallel uploads and to upload non-contiguous chunks.

// Actual file key
$uploadKey = uniqid();

$client->setKey($uploadKey)->file('/path/to/file', 'chunk_a.ext');

// Upload 10000 bytes starting from 1000 bytes
$bytesUploaded = $client->seek(1000)->upload(10000);
$chunkAkey     = $client->getKey();

// Upload 1000 bytes starting from 0 bytes
$bytesUploaded = $client->setFileName('chunk_b.ext')->seek(0)->upload(1000);
$chunkBkey     = $client->getKey();

// Upload remaining bytes starting from 11000 bytes (10000 +  1000)
$bytesUploaded = $client->setFileName('chunk_c.ext')->seek(11000)->upload();
$chunkCkey     = $client->getKey();

// Concatenate partial uploads
$client->setFileName('actual_file.ext')->concat($uploadKey, $chunkBkey, $chunkAkey, $chunkCkey);

Additionally, the server will verify checksum against the merged file to make sure that the file is not corrupt.

Events

Often times, you may want to perform some operation after the upload is complete or created. For example, you may want to crop images after upload or transcode a file and email it to your user. You can utilize tus events for these operations. Following events are dispatched by server during different point of execution.

Event Name	Dispatched
tus-server.upload.created	after the upload is created during POST request.
tus-server.upload.progress	after a chunk is uploaded during PATCH request.
tus-server.upload.complete	after the upload is complete and checksum verification is done.
tus-server.upload.merged	after all partial uploads are merged during concatenation request.

Responding to an Event

To listen to an event, you can simply attach a listener to the event name. An TusEvent instance is created and passed to all of the listeners.

$server->event()->addListener('tus-server.upload.complete', function (\TusPhp\Events\TusEvent $event) {
    $fileMeta = $event->getFile()->details();
    $request  = $event->getRequest();
    $response = $event->getResponse();

    // ...
});

or, you can also bind some method of a custom class.

/**
 * Listener can be method from any normal class.
 */
class SomeClass
{
    public function postUploadOperation(\TusPhp\Events\TusEvent $event)
    {
        // ...
    }
}

$listener = new SomeClass();

$server->event()->addListener('tus-server.upload.complete', [$listener, 'postUploadOperation']);

Middleware

You can manipulate request and response of a server using a middleware. Middleware can be used to run a piece of code before a server calls the actual handle method. You can use middleware to authenticate a request, handle CORS, whitelist/blacklist an IP etc.

Creating a Middleware

In order to create a middleware, you need to implement TusMiddleware interface. The handle method provides request and response object for you to manipulate.

<?php

namespace Your\Namespace;

use TusPhp\Request;
use TusPhp\Response;
use TusPhp\Middleware\TusMiddleware;

class Authenticated implements TusMiddleware
{
    // ...

    /**
     * {@inheritDoc}
     */
    public function handle(Request $request, Response $response)
    {
        // Check if user is authenticated
        if (! $this->user->isLoggedIn()) {
            throw new UnauthorizedHttpException('User not authenticated');
        }

        $request->getRequest()->headers->set('Authorization', 'Bearer ' . $this->user->token());
    }

    // ...
}

Adding a Middleware

To add a middleware, get middleware object from server and simply pass middleware classes.

$server->middleware()->add(Authenticated::class, AnotherMiddleware::class);

Or, you can also pass middleware class objects.

$authenticated = new Your\Namespace\Authenticated(new User());

$server->middleware()->add($authenticated);

Skipping a Middleware

If you wish to skip or ignore any middleware, you can do so by using the skip method.

$server->middleware()->skip(Cors::class, AnotherMiddleware::class);

Compatible with Uppy

Uppy is a sleek, modular file uploader plugin developed by same folks behind tus protocol. You can use uppy to seamlessly integrate official tus-js-client with tus-php server. Check out more details in uppy docs.

uppy.use(Tus, {
  endpoint: 'https://tus-server.yoursite.com/files/', // use your tus endpoint here
  resume: true,
  autoRetry: true,
  retryDelays: [0, 1000, 3000, 5000]
})

Setting up a dev environment and/or running examples locally

An ajax based example for this implementation can be found in examples/ folder. You can either build and run it using docker or use kubernetes locally with minikube.

Docker

Make sure that docker and docker-compose are installed in your system. Then, run docker script from project root.

$ bin/docker.sh

Now, the client can be accessed at http://0.0.0.0:8080 and server can be accessed at http://0.0.0.0:8081. Default API endpoint is set to/files and uploaded files can be found inside uploads folder. All docker configs can be found in docker/ folder.

Kubernetes with minikube

Make sure you have minikube and kubectl are installed in your system. Then, build and spin up containers using k8s script from project root.

$ bin/k8s.sh

The script will set minikube docker env, build all required docker images locally, create kubernetes objects and serve client at port 30020. After successful build, the client can be accessed at http://192.168.99.100:30020 and server can be accessed at http://192.168.99.100:30021.

The script will create 1 client replica and 3 server replicas by default. All kubernetes configs can be found inside k8s/ folder, you can tweak it as required.

You can use another helper script while using minikube to list all uploaded files, login to redis and clear redis cache.

# List all uploads
$ bin/minikube.sh uploads

# Login to redis
$ bin/minikube.sh redis

# Clear redis cache
$ bin/minikube.sh clear-cache

Since the server supports tus expiration extension, a cron job is set to run once a day at midnight to free server resources. You can adjust it as required in k8s/cron.yml.

Contributing

1. Install PHPUnit and composer if you haven't already.
2. Install dependencies

   $ composer install

3. Run tests with phpunit

   $ ./vendor/bin/phpunit
   
   # or
   
   $ composer test

4. Validate changes against PSR2 Coding Standards

   $ composer cs-fixer
   
   # or
   
   $ ./vendor/bin/php-cs-fixer fix <changes> --rules=@PSR2,not_operator_with_space,single_quote

Questions about this project?

Please feel free to report any bug found. Pull requests, issues, and project recommendations are more than welcome!

Supporters