More than 3 hashboards? - S19 Hydro 158th - Data only for 3 boards but i have 4

Question

More than 3 hashboards? - S19 Hydro 158th - Data only for 3 boards but i have 4

Closed this issue 19 days ago · 11 comments

I recently installed the integration, and seems to be very fine, but apparently i only get data from 3 out of my 4 hash boards (Board #0, #1 And #2)

Is this a fault? Is there anything i can do ?

Answer 1 · 2024-01-01T16:20:33.000Z

There's nothing that can be done about this right now, pyasic does have support for the hydro (see UpstreamData/pyasic#83), but it won't work until home assistant is updated in the new year to work with httpx 0.26.0. If you watch this PR, once it is merged it will add support for the hydro, #252.

Answer 2 · 2024-01-23T20:56:56.000Z

Should work in most recent version (v1.1.0).

Answer 3 · 2024-07-30T07:33:36.000Z

Hello all :)
I have been using a S19 air cooled which I am controlling with BOS and HASS-Miner and it is workin perfect for me for many months now :)

I recently bought an S19 Pro+ Hyd that have 4 hashboards which I only a few days ago were able to install BOS as I was waiting for support in the latest firmware for my PSU. I can add the miner in HA with HASS-Miner, but I can only see 3 hash boards. Also, I am unable to change the power limit in HA, only switch the miner on/off and monitor values.

I have updated all available updates for HA and HASS-Miner, but still can only see data from 3 hash boards and unable to change power limit.

@Rasmusbangp did you get data from all 4 hash boards for your miner?

@b-rowan the issue that I have not being able to change power limit, can it be related to lack of support for my hydro miner and 4 hash boards?

Answer 4 · 2024-07-30T13:44:27.000Z

You're running BOS+ on your hydro? I will have to check if I have that supported, I think I might need to put out a new version possibly. I may also need you to get the model name from the devdetails command, but I'll reply later if I need that.

Answer 5 · 2024-07-30T14:22:08.000Z

@b-rowan yes, I am running BOS+ on my hydro, the last firmware. Right now I do not have access to HA and the miner, but I will collect the data as soon as possible.

Answer 6 · 2024-08-05T04:07:43.000Z

Any luck with v1.1.2?

Answer 7 · 2024-08-05T06:35:42.000Z

@b-rowan , the 4th hash board is not visible in HA for me with the Antminer Pro+ hyd miner. But it is probably related to the lack of support for my type of miner in pyasic. Pyasic is now having a new revision which probably contain support for my miner, Hass-Miner probably need to be revised to fetch the last pyasic revision right?

Answer 8 · 2024-08-28T12:51:08.000Z

@b-rowan , when do you expect the next revision of hass-miner will be released so support for the Antminer Pro+ hyd miner will be added?

Answer 9 · 2024-08-28T15:00:40.000Z

Try v1.1.13

Answer 10 · 2024-09-13T08:28:12.000Z

@b-rowan , sorry for not replying earlier. My miner has been on repairs, expecting to receive it back shortly from repairs. I will test it as soon as I receive it.

Thanks again for the great work you are doing!

Answer 11 · 2024-09-25T06:33:36.000Z

@b-rowan , I have now received my miner back from repairs and with the latest updates of HASS-Miner, it added all hashboards in HA, thank you!