Maple Mini board not connected?
dbhaig opened this issue · 2 comments
Hello.
I am running Ubuntu Linux
I have loaded the hid_maple_mini.bin onto my maple mini clone board, following the procedure describe here: https://www.youtube.com/watch?v=Myon8H111PQ
When I plug in the board,
lsusb returns: ID 1209:beba InterBiometrics
ls /dev/ttyUSB* returns nothing
When I try to upload a sketch using the Arduino IDE I get the following messages:
error, counldn't open [/dev/ttyUSB0]
+-----------------------------------------------------------------------+
| HID-Flash v2.2.1 - STM32 HID Bootloader Flash Tool |
| (c) 2018 - Bruno Freitas http://www.brunofreitas.com |
| (c) 2018-2019 - Vassilis Serasidis https://www.serasidis.gr |
| Customized for STM32duino ecosystem https://www.stm32duino.com |
+-----------------------------------------------------------------------+
Trying to open the [ttyUSB0]...
Unable to open the [ttyUSB0]
Searching for [1209:BEBA] device...
[1209:BEBA] device is found !
Sending command...
the selected serial port > Sending command...
does not exist or your board is not connected
What am I missing?
Thanks
Which version of STM32 core did you install?
I had a negative experience with 1.9 and 2.2.2. maybe you give 1.8 a try.
I am using 1.9.0. I will give 1.8.0 a try.
Thanks