Back to original firmware

Question

Back to original firmware

ducanh1603 opened this issue 2 years ago · 4 comments

I’ve use winmerge but it doesn’t work. The notification show : ”1 different”. I need some help my clock BLACK OUT 😓. I would appreciate it if someone could help me. Sorry about my bad-english 😂

Answer 1 · 2022-12-30T22:21:21.000Z

ducanh1603 commented 2 years ago

Answer 2 · 2022-12-31T20:19:38.000Z

My MAC id: 78:21:84:6b:c3:98
Someone please make a binary file flash for me pls. I tried 20-30 times =((((

Answer 3 · 2023-01-10T08:44:03.000Z

I was not able to get my clock back to working state by changing MAC address. Well it works on first power-up but does not work on a second power cycle. So not useful.
If you didn't save your original flash image, there is a very low chance to get it back into original state.
I suggest you load this EleksTubeHax firmware. it is better than original ;)

Answer 4 · 2023-01-10T19:12:20.000Z

I suggest you load this EleksTubeHax firmware. it is better than original ;)

he suggests modestly. ;-)

@ducanh1603 I'm sorry, but I don't think this is something we'll be able to help you with. If you run into problems getting the EleksTubeHax firmware loaded, let us know.

Good luck.