SpacehuhnTech/WiFiDuck

Problem with SS Micro

adamff-dev opened this issue · 2 comments

adamff-dev commented

Is there an existing issue for this?

  • I have searched the existing issues

Describe your problem

The AP network won't show up (SS Micro)

Steps to reproduce

  1. I flashed my ESP8266 through my SS Micro
  2. I wired everything up as following:
    ESP8266 | Atmega32u4
    D1 alias GPIO 5 → 3 alias SCL
    D2 alias GPIO 4 → 2 alias SDA
    GND → GND
    VCC | 3.3
  3. I flashed atmega_duck

And the AP network is not showing up. Also, the ESP8266 LED won't blink. Do I have to change some vars on config.h or something?

What hardware are you using?

SS Micro and ESP8266

Anything else?

No response

Soumy100 commented

IMG_0227
IMG_0231
IMG_0228
Same Issue is with me I have connected as per the instructions and then after I flashed my boards and then I connected power to micro but the wifiduck AP is not showing. I don't know where is the issue so I check pro micro and d1mini its working fine and changed jumper cables but same issue I have shared the images of my connections please have a look

stale commented

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.