RockBand StageKit API Linux support libraries for the PDP Rock Band Stage Kit, including full control over the strobe, fog, and LED lights. Currently only supports Linux. ----------------------------- USAGE: To use the API, simply put the stagekit.h and stagekit.c files in the relevant spot of your project directory, #include them, and then issue an sk_init(char *filename) where filename is the location of the appropriate event file (such as /dev/input/event5), and then use any of the other commands according to what you want to do. sk_init(filename) Open an event interface file for a stage kit. If set to NULL, the API will attempt to probe for one automatically. sk_close() Closes the file handles for the stage kit. sk_alloff() Sends a "panic" signal to turn everything off at once. sk_setstrobe(speed) Set strobe flash speed. Valid range 0-4. sk_setfog(fog) Turn the fogger on or off. sk_setred(red) Set the red LEDs according to the first 8 bits of input, where each bit represents a single LED. sk_setyellow(yellow) Set the yellow LEDs according to the first 8 bits of input, where each bit represents a single LED. sk_setgreen(green) Set the green LEDs according to the first 8 bits of input, where each bit represents a single LED. sk_setblue(blue) Set the blue LEDs according to the first 8 bits of input, where each bit represents a single LED.