No new mountpoint - I don't know if my sd2vita card work.
Closed this issue · 4 comments
henres commented
I have a psvita 1004 with henkaku in 3.65
I have this log:
# storage_config.txt
MCD=uma0
INT=imc0
GCD=ux0
# storage_log.txt
StorageMgrKernel v3.0 started.
system_sw_version: 03650000
Installing SceSblSsMgr hook...
tm0 : tm0:
exfattm0
sdstor0:int-lp-ign-vtrm
(null)
00000500
ur0 : ur0:
exfatur0
sdstor0:int-lp-ign-user
(null)
00000600
ux0 : ux0:
exfatux0
sdstor0:xmc-lp-ign-userext
(null)
00000800
gro0 : gro0:
exfatgro0
sdstor0:gcd-lp-ign-gamero
(null)
00000900
grw0 : grw0:
exfatgrw0
sdstor0:gcd-lp-ign-gamerw
(null)
00000A00
imc0 : imc0:
exfatimc0
sdstor0:int-lp-ign-userext
(null)
00000D00
xmc0 : xmc0:
exfatxmc0
sdstor0:xmc-lp-ign-userext
(null)
00000E00
uma0 : uma0:
exfatuma0
sdstor0:uma-pp-act-a
sdstor0:uma-lp-act-entire
00000F00
mount point id : 0x0800
Reading current device blkdev for mount point 0x800 :
sdstor0:xmc-lp-ign-userext
current blkdev : sdstor0:xmc-lp-ign-userext (null)
Is ux0: redirected : 0
ux0: current device : sdstor0:xmc-lp-ign-userext (null)
Reading config...
Checking if UMA is in config.
Reading config...
Reading config...
Line of size 8 : MCD=uma0
Reading config...
Line of size 8 : INT=imc0
Reading config...
Line of size 7 : GCD=ux0
Checking if GCD is in config.
Reading config...
Reading config...
Line of size 8 : MCD=uma0
Reading config...
Line of size 8 : INT=imc0
Reading config...
Line of size 7 : GCD=ux0
Checking if MCD is in config.
Reading config...
Reading config...
Line of size 8 : MCD=uma0
Checking if INT is in config.
Reading config...
Reading config...
Line of size 8 : MCD=uma0
Reading config...
Line of size 8 : INT=imc0
No UMA config found.
GCD config found at line 2.
GC2SD detection...
GC2SD not detected.
Reading mount point for line 2...
Reading config...
Line of size 7 : GCD=ux0
Line length : 7.
Not read string length (device string) : 4.
Current line mount point of string length 3 : ux0
INT config found at line 1.
Internal storage detection...
Internal storage not detected.
MCD config found at line 0.
MCD detection...
MCD detected.
Reading mount point for line 0...
Reading config...
Line of size 8 : MCD=uma0
Line length : 8.
Not read string length (device string) : 4.
Current line mount point of string length 4 : uma0
mount is now : sdstor0:xmc-lp-ign-userext
mount point id : 0x0800
Reading current device blkdev for mount point 0x800 :
sdstor0:xmc-lp-ign-userext
current blkdev : sdstor0:xmc-lp-ign-userext (null)
Is ux0: redirected : 0
ux0: current device : sdstor0:xmc-lp-ign-userext (null)
mount point id : 0x0A00
Reading current device blkdev for mount point 0xA00 :
sdstor0:gcd-lp-ign-gamerw
current blkdev : sdstor0:gcd-lp-ign-gamerw (null)
Is grw0: redirected : 0
grw0: current device : sdstor0:gcd-lp-ign-gamerw (null)
mount point id : 0x0F00
Reading current device blkdev for mount point 0xF00 :
sdstor0:xmc-lp-ign-userext
current blkdev : sdstor0:xmc-lp-ign-userext (null)
Is uma0: redirected : 1
uma0: current device : sdstor0:xmc-lp-ign-userext (null)
StorageMgrKernel finished starting with success.
uma0: remounting failed. Aborting after 5s.
It seem that with this line :
GCD config found at line 2.
GC2SD detection...
GC2SD not detected.
my sd card doesn't seem detected ...
Thanks for your help
henres commented
It was my sd2vita adaptater. i buy another one and the new one ask me to format at every boot of the vita ...
henres commented
And it format my psvita memory card too ...
henres commented
I have try
MCD=uma0
INT=imc0
GCD=grw0
Still no new mount point.
henres commented
I don't know why, but i try again and it work.