<<<<<<< HEAD

PyTorch Pretrained Bert

This repository contains an op-for-op PyTorch reimplementation of Google's TensorFlow repository for the BERT model that was released together with the paper BERT: Pre-training of Deep Bidirectional Transformers for Language Understanding by Jacob Devlin, Ming-Wei Chang, Kenton Lee and Kristina Toutanova.

This implementation is provided with Google's pre-trained models, examples, notebooks and a command-line interface to load any pre-trained TensorFlow checkpoint for BERT is also provided.

Content

Section	Description
Installation	How to install the package
Overview	Overview of the package
Usage	Quickstart examples
Doc	Detailed documentation
Examples	Detailed examples on how to fine-tune Bert
Notebooks	Introduction on the provided Jupyter Notebooks
TPU	Notes on TPU support and pretraining scripts
Command-line interface	Convert a TensorFlow checkpoint in a PyTorch dump

Installation

This repo was tested on Python 3.5+ and PyTorch 0.4.1/1.0.0

With pip

PyTorch pretrained bert can be installed by pip as follows:

pip install pytorch-pretrained-bert

From source

Clone the repository and run:

pip install [--editable] .

A series of tests is included in the tests folder and can be run using pytest (install pytest if needed: pip install pytest).

You can run the tests with the command:

python -m pytest -sv tests/

Overview

This package comprises the following classes that can be imported in Python and are detailed in the Doc section of this readme:

Eight PyTorch models (torch.nn.Module) for Bert with pre-trained weights (in the modeling.py file):
- BertModel - raw BERT Transformer model (fully pre-trained),
- BertForMaskedLM - BERT Transformer with the pre-trained masked language modeling head on top (fully pre-trained),
- BertForNextSentencePrediction - BERT Transformer with the pre-trained next sentence prediction classifier on top (fully pre-trained),
- BertForPreTraining - BERT Transformer with masked language modeling head and next sentence prediction classifier on top (fully pre-trained),
- BertForSequenceClassification - BERT Transformer with a sequence classification head on top (BERT Transformer is pre-trained, the sequence classification head is only initialized and has to be trained),
- BertForMultipleChoice - BERT Transformer with a multiple choice head on top (used for task like Swag) (BERT Transformer is pre-trained, the multiple choice classification head is only initialized and has to be trained),
- BertForTokenClassification - BERT Transformer with a token classification head on top (BERT Transformer is pre-trained, the token classification head is only initialized and has to be trained),
- BertForQuestionAnswering - BERT Transformer with a token classification head on top (BERT Transformer is pre-trained, the token classification head is only initialized and has to be trained).
Three tokenizers (in the tokenization.py file):
- BasicTokenizer - basic tokenization (punctuation splitting, lower casing, etc.),
- WordpieceTokenizer - WordPiece tokenization,
- BertTokenizer - perform end-to-end tokenization, i.e. basic tokenization followed by WordPiece tokenization.
One optimizer (in the optimization.py file):
- BertAdam - Bert version of Adam algorithm with weight decay fix, warmup and linear decay of the learning rate.
A configuration class (in the modeling.py file):
- BertConfig - Configuration class to store the configuration of a BertModel with utilities to read and write from JSON configuration files.

The repository further comprises:

Five examples on how to use Bert (in the examples folder):
- extract_features.py - Show how to extract hidden states from an instance of BertModel,
- run_classifier.py - Show how to fine-tune an instance of BertForSequenceClassification on GLUE's MRPC task,
- run_squad.py - Show how to fine-tune an instance of BertForQuestionAnswering on SQuAD v1.0 task.
- run_swag.py - Show how to fine-tune an instance of BertForMultipleChoice on Swag task.
- run_lm_finetuning - Show how to fine-tune an instance of `BertForPretraining' on a target text corpus.
These examples are detailed in the Examples section of this readme.
Three notebooks that were used to check that the TensorFlow and PyTorch models behave identically (in the notebooks folder):
- Comparing-TF-and-PT-models.ipynb - Compare the hidden states predicted by BertModel,
- Comparing-TF-and-PT-models-SQuAD.ipynb - Compare the spans predicted by BertForQuestionAnswering instances,
- Comparing-TF-and-PT-models-MLM-NSP.ipynb - Compare the predictions of the BertForPretraining instances.
These notebooks are detailed in the Notebooks section of this readme.
A command-line interface to convert any TensorFlow checkpoint in a PyTorch dump:

This CLI is detailed in the Command-line interface section of this readme.

Usage

Here is a quick-start example using BertTokenizer, BertModel and BertForMaskedLM class with Google AI's pre-trained Bert base uncased model. See the doc section below for all the details on these classes.

First let's prepare a tokenized input with BertTokenizer

import torch
from pytorch_pretrained_bert import BertTokenizer, BertModel, BertForMaskedLM

# Load pre-trained model tokenizer (vocabulary)
tokenizer = BertTokenizer.from_pretrained('bert-base-uncased')

# Tokenized input
text = "Who was Jim Henson ? Jim Henson was a puppeteer"
tokenized_text = tokenizer.tokenize(text)

# Mask a token that we will try to predict back with `BertForMaskedLM`
masked_index = 6
tokenized_text[masked_index] = '[MASK]'
assert tokenized_text == ['who', 'was', 'jim', 'henson', '?', 'jim', '[MASK]', 'was', 'a', 'puppet', '##eer']

# Convert token to vocabulary indices
indexed_tokens = tokenizer.convert_tokens_to_ids(tokenized_text)
# Define sentence A and B indices associated to 1st and 2nd sentences (see paper)
segments_ids = [0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1]

# Convert inputs to PyTorch tensors
tokens_tensor = torch.tensor([indexed_tokens])
segments_tensors = torch.tensor([segments_ids])

Let's see how to use BertModel to get hidden states

# Load pre-trained model (weights)
model = BertModel.from_pretrained('bert-base-uncased')
model.eval()

# Predict hidden states features for each layer
encoded_layers, _ = model(tokens_tensor, segments_tensors)
# We have a hidden states for each of the 12 layers in model bert-base-uncased
assert len(encoded_layers) == 12

And how to use BertForMaskedLM

# Load pre-trained model (weights)
model = BertForMaskedLM.from_pretrained('bert-base-uncased')
model.eval()

# Predict all tokens
predictions = model(tokens_tensor, segments_tensors)

# confirm we were able to predict 'henson'
predicted_index = torch.argmax(predictions[0, masked_index]).item()
predicted_token = tokenizer.convert_ids_to_tokens([predicted_index])[0]
assert predicted_token == 'henson'

Doc

Here is a detailed documentation of the classes in the package and how to use them:

Sub-section	Description
Loading Google AI's pre-trained weigths	How to load Google AI's pre-trained weight or a PyTorch saved instance
PyTorch models	API of the eight PyTorch model classes: `BertModel`, `BertForMaskedLM`, `BertForNextSentencePrediction`, `BertForPreTraining`, `BertForSequenceClassification`, `BertForMultipleChoice` or `BertForQuestionAnswering`
Tokenizer: `BertTokenizer`	API of the `BertTokenizer` class
Optimizer: `BertAdam`	API of the `BertAdam` class

Loading Google AI's pre-trained weigths and PyTorch dump

To load one of Google AI's pre-trained models or a PyTorch saved model (an instance of BertForPreTraining saved with torch.save()), the PyTorch model classes and the tokenizer can be instantiated as

model = BERT_CLASS.from_pretrained(PRE_TRAINED_MODEL_NAME_OR_PATH, cache_dir=None)

where

BERT_CLASS is either the BertTokenizer class (to load the vocabulary) or one of the eight PyTorch model classes (to load the pre-trained weights): BertModel, BertForMaskedLM, BertForNextSentencePrediction, BertForPreTraining, BertForSequenceClassification, BertForTokenClassification, BertForMultipleChoice or BertForQuestionAnswering, and
PRE_TRAINED_MODEL_NAME_OR_PATH is either:
- the shortcut name of a Google AI's pre-trained model selected in the list:
  - bert-base-uncased: 12-layer, 768-hidden, 12-heads, 110M parameters
  - bert-large-uncased: 24-layer, 1024-hidden, 16-heads, 340M parameters
  - bert-base-cased: 12-layer, 768-hidden, 12-heads , 110M parameters
  - bert-large-cased: 24-layer, 1024-hidden, 16-heads, 340M parameters
  - bert-base-multilingual-uncased: (Orig, not recommended) 102 languages, 12-layer, 768-hidden, 12-heads, 110M parameters
  - bert-base-multilingual-cased: (New, recommended) 104 languages, 12-layer, 768-hidden, 12-heads, 110M parameters
  - bert-base-chinese: Chinese Simplified and Traditional, 12-layer, 768-hidden, 12-heads, 110M parameters
- a path or url to a pretrained model archive containing:
  - bert_config.json a configuration file for the model, and
  - pytorch_model.bin a PyTorch dump of a pre-trained instance BertForPreTraining (saved with the usual torch.save())
If PRE_TRAINED_MODEL_NAME_OR_PATH is a shortcut name, the pre-trained weights will be downloaded from AWS S3 (see the links here) and stored in a cache folder to avoid future download (the cache folder can be found at ~/.pytorch_pretrained_bert/).
cache_dir can be an optional path to a specific directory to download and cache the pre-trained model weights. This option is useful in particular when you are using distributed training: to avoid concurrent access to the same weights you can set for example cache_dir='./pretrained_model_{}'.format(args.local_rank) (see the section on distributed training for more information).

Uncased means that the text has been lowercased before WordPiece tokenization, e.g., John Smith becomes john smith. The Uncased model also strips out any accent markers. Cased means that the true case and accent markers are preserved. Typically, the Uncased model is better unless you know that case information is important for your task (e.g., Named Entity Recognition or Part-of-Speech tagging). For information about the Multilingual and Chinese model, see the Multilingual README or the original TensorFlow repository.

When using an uncased model, make sure to pass --do_lower_case to the example training scripts (or pass do_lower_case=True to FullTokenizer if you're using your own script and loading the tokenizer your-self.).

Example:

tokenizer = BertTokenizer.from_pretrained('bert-base-uncased', do_lower_case=True)
model = BertForSequenceClassification.from_pretrained('bert-base-uncased')

PyTorch models

1. `BertModel`

BertModel is the basic BERT Transformer model with a layer of summed token, position and sequence embeddings followed by a series of identical self-attention blocks (12 for BERT-base, 24 for BERT-large).

The inputs and output are identical to the TensorFlow model inputs and outputs.

We detail them here. This model takes as inputs: modeling.py

input_ids: a torch.LongTensor of shape [batch_size, sequence_length] with the word token indices in the vocabulary (see the tokens preprocessing logic in the scripts extract_features.py, run_classifier.py and run_squad.py), and
token_type_ids: an optional torch.LongTensor of shape [batch_size, sequence_length] with the token types indices selected in [0, 1]. Type 0 corresponds to a sentence A and type 1 corresponds to a sentence B token (see BERT paper for more details).
attention_mask: an optional torch.LongTensor of shape [batch_size, sequence_length] with indices selected in [0, 1]. It's a mask to be used if some input sequence lengths are smaller than the max input sequence length of the current batch. It's the mask that we typically use for attention when a batch has varying length sentences.
output_all_encoded_layers: boolean which controls the content of the encoded_layers output as described below. Default: True.

This model outputs a tuple composed of:

encoded_layers: controled by the value of the output_encoded_layers argument:
- output_all_encoded_layers=True: outputs a list of the encoded-hidden-states at the end of each attention block (i.e. 12 full sequences for BERT-base, 24 for BERT-large), each encoded-hidden-state is a torch.FloatTensor of size [batch_size, sequence_length, hidden_size],
- output_all_encoded_layers=False: outputs only the encoded-hidden-states corresponding to the last attention block, i.e. a single torch.FloatTensor of size [batch_size, sequence_length, hidden_size],
pooled_output: a torch.FloatTensor of size [batch_size, hidden_size] which is the output of a classifier pretrained on top of the hidden state associated to the first character of the input (CLF) to train on the Next-Sentence task (see BERT's paper).

An example on how to use this class is given in the extract_features.py script which can be used to extract the hidden states of the model for a given input.

2. `BertForPreTraining`

BertForPreTraining includes the BertModel Transformer followed by the two pre-training heads:

the masked language modeling head, and
the next sentence classification head.

Inputs comprises the inputs of the BertModel class plus two optional labels:

masked_lm_labels: masked language modeling labels: torch.LongTensor of shape [batch_size, sequence_length] with indices selected in [-1, 0, ..., vocab_size]. All labels set to -1 are ignored (masked), the loss is only computed for the labels set in [0, ..., vocab_size]
next_sentence_label: next sentence classification loss: torch.LongTensor of shape [batch_size] with indices selected in [0, 1]. 0 => next sentence is the continuation, 1 => next sentence is a random sentence.

Outputs:

if masked_lm_labels and next_sentence_label are not None: Outputs the total_loss which is the sum of the masked language modeling loss and the next sentence classification loss.
if masked_lm_labels or next_sentence_label is None: Outputs a tuple comprising
- the masked language modeling logits, and
- the next sentence classification logits.

An example on how to use this class is given in the run_lm_finetuning.py script which can be used to fine-tune the BERT language model on your specific different text corpus. This should improve model performance, if the language style is different from the original BERT training corpus (Wiki + BookCorpus).

3. `BertForMaskedLM`

BertForMaskedLM includes the BertModel Transformer followed by the (possibly) pre-trained masked language modeling head.

Inputs comprises the inputs of the BertModel class plus optional label:

masked_lm_labels: masked language modeling labels: torch.LongTensor of shape [batch_size, sequence_length] with indices selected in [-1, 0, ..., vocab_size]. All labels set to -1 are ignored (masked), the loss is only computed for the labels set in [0, ..., vocab_size]

Outputs:

if masked_lm_labels is not None: Outputs the masked language modeling loss.
if masked_lm_labels is None: Outputs the masked language modeling logits.

4. `BertForNextSentencePrediction`

BertForNextSentencePrediction includes the BertModel Transformer followed by the next sentence classification head.

Inputs comprises the inputs of the BertModel class plus an optional label:

next_sentence_label: next sentence classification loss: torch.LongTensor of shape [batch_size] with indices selected in [0, 1]. 0 => next sentence is the continuation, 1 => next sentence is a random sentence.

Outputs:

if next_sentence_label is not None: Outputs the next sentence classification loss.
if next_sentence_label is None: Outputs the next sentence classification logits.

5. `BertForSequenceClassification`

BertForSequenceClassification is a fine-tuning model that includes BertModel and a sequence-level (sequence or pair of sequences) classifier on top of the BertModel.

The sequence-level classifier is a linear layer that takes as input the last hidden state of the first character in the input sequence (see Figures 3a and 3b in the BERT paper).

An example on how to use this class is given in the run_classifier.py script which can be used to fine-tune a single sequence (or pair of sequence) classifier using BERT, for example for the MRPC task.

6. `BertForMultipleChoice`

BertForMultipleChoice is a fine-tuning model that includes BertModel and a linear layer on top of the BertModel.

The linear layer outputs a single value for each choice of a multiple choice problem, then all the outputs corresponding to an instance are passed through a softmax to get the model choice.

This implementation is largely inspired by the work of OpenAI in Improving Language Understanding by Generative Pre-Training and the answer of Jacob Devlin in the following issue.

An example on how to use this class is given in the run_swag.py script which can be used to fine-tune a multiple choice classifier using BERT, for example for the Swag task.

7. `BertForTokenClassification`

BertForTokenClassification is a fine-tuning model that includes BertModel and a token-level classifier on top of the BertModel.

The token-level classifier is a linear layer that takes as input the last hidden state of the sequence.

8. `BertForQuestionAnswering`

BertForQuestionAnswering is a fine-tuning model that includes BertModel with a token-level classifiers on top of the full sequence of last hidden states.

The token-level classifier takes as input the full sequence of the last hidden state and compute several (e.g. two) scores for each tokens that can for example respectively be the score that a given token is a start_span and a end_span token (see Figures 3c and 3d in the BERT paper).

An example on how to use this class is given in the run_squad.py script which can be used to fine-tune a token classifier using BERT, for example for the SQuAD task.

Tokenizer: `BertTokenizer`

BertTokenizer perform end-to-end tokenization, i.e. basic tokenization followed by WordPiece tokenization.

This class has two arguments:

vocab_file: path to a vocabulary file.
do_lower_case: convert text to lower-case while tokenizing. Default = True.

and three methods:

tokenize(text): convert a str in a list of str tokens by (1) performing basic tokenization and (2) WordPiece tokenization.
convert_tokens_to_ids(tokens): convert a list of str tokens in a list of int indices in the vocabulary.
convert_ids_to_tokens(tokens): convert a list of int indices in a list of str tokens in the vocabulary.

Please refer to the doc strings and code in tokenization.py for the details of the BasicTokenizer and WordpieceTokenizer classes. In general it is recommended to use BertTokenizer unless you know what you are doing.

Optimizer: `BertAdam`

BertAdam is a torch.optimizer adapted to be closer to the optimizer used in the TensorFlow implementation of Bert. The differences with PyTorch Adam optimizer are the following:

BertAdam implements weight decay fix,
BertAdam doesn't compensate for bias as in the regular Adam optimizer.

The optimizer accepts the following arguments:

lr : learning rate
warmup : portion of t_total for the warmup, -1 means no warmup. Default : -1
t_total : total number of training steps for the learning rate schedule, -1 means constant learning rate. Default : -1
schedule : schedule to use for the warmup (see above). Default : 'warmup_linear'
b1 : Adams b1. Default : 0.9
b2 : Adams b2. Default : 0.999
e : Adams epsilon. Default : 1e-6
weight_decay: Weight decay. Default : 0.01
max_grad_norm : Maximum norm for the gradients (-1 means no clipping). Default : 1.0

Examples

Sub-section	Description
Training large models: introduction, tools and examples	How to use gradient-accumulation, multi-gpu training, distributed training, optimize on CPU and 16-bits training to train Bert models
Fine-tuning with BERT: running the examples	Running the examples in `./examples`: `extract_classif.py`, `run_classifier.py`, `run_squad.py` and `run_lm_finetuning.py`
Fine-tuning BERT-large on GPUs	How to fine tune `BERT large`

Training large models: introduction, tools and examples

BERT-base and BERT-large are respectively 110M and 340M parameters models and it can be difficult to fine-tune them on a single GPU with the recommended batch size for good performance (in most case a batch size of 32).

To help with fine-tuning these models, we have included several techniques that you can activate in the fine-tuning scripts run_classifier.py and run_squad.py: gradient-accumulation, multi-gpu training, distributed training and 16-bits training . For more details on how to use these techniques you can read the tips on training large batches in PyTorch that I published earlier this month.

Here is how to use these techniques in our scripts:

Gradient Accumulation: Gradient accumulation can be used by supplying a integer greater than 1 to the --gradient_accumulation_steps argument. The batch at each step will be divided by this integer and gradient will be accumulated over gradient_accumulation_steps steps.
Multi-GPU: Multi-GPU is automatically activated when several GPUs are detected and the batches are splitted over the GPUs.
Distributed training: Distributed training can be activated by supplying an integer greater or equal to 0 to the --local_rank argument (see below).
16-bits training: 16-bits training, also called mixed-precision training, can reduce the memory requirement of your model on the GPU by using half-precision training, basically allowing to double the batch size. If you have a recent GPU (starting from NVIDIA Volta architecture) you should see no decrease in speed. A good introduction to Mixed precision training can be found here and a full documentation is here. In our scripts, this option can be activated by setting the --fp16 flag and you can play with loss scaling using the --loss_scale flag (see the previously linked documentation for details on loss scaling). The loss scale can be zero in which case the scale is dynamically adjusted or a positive power of two in which case the scaling is static.

To use 16-bits training and distributed training, you need to install NVIDIA's apex extension as detailed here. You will find more information regarding the internals of apex and how to use apex in the doc and the associated repository. The results of the tests performed on pytorch-BERT by the NVIDIA team (and my trials at reproducing them) can be consulted in the relevant PR of the present repository.

Note: To use Distributed Training, you will need to run one training script on each of your machines. This can be done for example by running the following command on each server (see the above mentioned blog post for more details):

python -m torch.distributed.launch --nproc_per_node=4 --nnodes=2 --node_rank=$THIS_MACHINE_INDEX --master_addr="192.168.1.1" --master_port=1234 run_classifier.py (--arg1 --arg2 --arg3 and all other arguments of the run_classifier script)

Where $THIS_MACHINE_INDEX is an sequential index assigned to each of your machine (0, 1, 2...) and the machine with rank 0 has an IP address 192.168.1.1 and an open port 1234.

Fine-tuning with BERT: running the examples

We showcase several fine-tuning examples based on (and extended from) the original implementation:

a sequence-level classifier on the MRPC classification corpus,
a token-level classifier on the question answering dataset SQuAD, and
a sequence-level multiple-choice classifier on the SWAG classification corpus.
a BERT language model on another target corpus

MRPC

This example code fine-tunes BERT on the Microsoft Research Paraphrase Corpus (MRPC) corpus and runs in less than 10 minutes on a single K-80 and in 27 seconds (!) on single tesla V100 16GB with apex installed.

Before running this example you should download the GLUE data by running this script and unpack it to some directory $GLUE_DIR.

export GLUE_DIR=/path/to/glue

python run_classifier.py \
  --task_name MRPC \
  --do_train \
  --do_eval \
  --do_lower_case \
  --data_dir $GLUE_DIR/MRPC/ \
  --bert_model bert-base-uncased \
  --max_seq_length 128 \
  --train_batch_size 32 \
  --learning_rate 2e-5 \
  --num_train_epochs 3.0 \
  --output_dir /tmp/mrpc_output/

Our test ran on a few seeds with the original implementation hyper-parameters gave evaluation results between 84% and 88%.

Fast run with apex and 16 bit precision: fine-tuning on MRPC in 27 seconds! First install apex as indicated here. Then run

export GLUE_DIR=/path/to/glue

python run_classifier.py \
  --task_name MRPC \
  --do_train \
  --do_eval \
  --do_lower_case \
  --data_dir $GLUE_DIR/MRPC/ \
  --bert_model bert-base-uncased \
  --max_seq_length 128 \
  --train_batch_size 32 \
  --learning_rate 2e-5 \
  --num_train_epochs 3.0 \
  --output_dir /tmp/mrpc_output/

SQuAD

This example code fine-tunes BERT on the SQuAD dataset. It runs in 24 min (with BERT-base) or 68 min (with BERT-large) on a single tesla V100 16GB.

The data for SQuAD can be downloaded with the following links and should be saved in a $SQUAD_DIR directory.

export SQUAD_DIR=/path/to/SQUAD

python run_squad.py \
  --bert_model bert-base-uncased \
  --do_train \
  --do_predict \
  --do_lower_case \
  --train_file $SQUAD_DIR/train-v1.1.json \
  --predict_file $SQUAD_DIR/dev-v1.1.json \
  --train_batch_size 12 \
  --learning_rate 3e-5 \
  --num_train_epochs 2.0 \
  --max_seq_length 384 \
  --doc_stride 128 \
  --output_dir /tmp/debug_squad/

Training with the previous hyper-parameters gave us the following results:

{"f1": 88.52381567990474, "exact_match": 81.22043519394512}

SWAG

The data for SWAG can be downloaded by cloning the following repository

export SWAG_DIR=/path/to/SWAG

python run_swag.py \
  --bert_model bert-base-uncased \
  --do_train \
  --do_lower_case \
  --do_eval \
  --data_dir $SWAG_DIR/data \
  --train_batch_size 16 \
  --learning_rate 2e-5 \
  --num_train_epochs 3.0 \
  --max_seq_length 80 \
  --output_dir /tmp/swag_output/ \
  --gradient_accumulation_steps 4

Training with the previous hyper-parameters on a single GPU gave us the following results:

eval_accuracy = 0.8062081375587323
eval_loss = 0.5966546792367169
global_step = 13788
loss = 0.06423990014260186

LM Fine-tuning

The data should be a text file in the same format as sample_text.txt (one sentence per line, docs separated by empty line). You can download an exemplary training corpus generated from wikipedia articles and splitted into ~500k sentences with spaCy. Training one epoch on this corpus takes about 1:20h on 4 x NVIDIA Tesla P100 with train_batch_size=200 and max_seq_length=128:

python run_lm_finetuning.py \
  --bert_model bert-base-cased 
  --do_train 
  --train_file samples/sample_text.txt 
  --output_dir models 
  --num_train_epochs 5.0 
  --learning_rate 3e-5 
  --train_batch_size 32 
  --max_seq_length 128

Fine-tuning BERT-large on GPUs

The options we list above allow to fine-tune BERT-large rather easily on GPU(s) instead of the TPU used by the original implementation.

For example, fine-tuning BERT-large on SQuAD can be done on a server with 4 k-80 (these are pretty old now) in 18 hours. Our results are similar to the TensorFlow implementation results (actually slightly higher):

{"exact_match": 84.56953642384106, "f1": 91.04028647786927}

To get these results we used a combination of:

multi-GPU training (automatically activated on a multi-GPU server),
2 steps of gradient accumulation and
perform the optimization step on CPU to store Adam's averages in RAM.

Here is the full list of hyper-parameters for this run:

python ./run_squad.py \
  --bert_model bert-large-uncased \
  --do_train \
  --do_predict \
  --do_lower_case \
  --train_file $SQUAD_TRAIN \
  --predict_file $SQUAD_EVAL \
  --learning_rate 3e-5 \
  --num_train_epochs 2 \
  --max_seq_length 384 \
  --doc_stride 128 \
  --output_dir $OUTPUT_DIR \
  --train_batch_size 24 \
  --gradient_accumulation_steps 2

If you have a recent GPU (starting from NVIDIA Volta series), you should try 16-bit fine-tuning (FP16).

Here is an example of hyper-parameters for a FP16 run we tried:

python ./run_squad.py \
  --bert_model bert-large-uncased \
  --do_train \
  --do_predict \
  --do_lower_case \
  --train_file $SQUAD_TRAIN \
  --predict_file $SQUAD_EVAL \
  --learning_rate 3e-5 \
  --num_train_epochs 2 \
  --max_seq_length 384 \
  --doc_stride 128 \
  --output_dir $OUTPUT_DIR \
  --train_batch_size 24 \
  --fp16 \
  --loss_scale 128

The results were similar to the above FP32 results (actually slightly higher):

{"exact_match": 84.65468306527909, "f1": 91.238669287002}

Notebooks

We include three Jupyter Notebooks that can be used to check that the predictions of the PyTorch model are identical to the predictions of the original TensorFlow model.

The first NoteBook (Comparing-TF-and-PT-models.ipynb) extracts the hidden states of a full sequence on each layers of the TensorFlow and the PyTorch models and computes the standard deviation between them. In the given example, we get a standard deviation of 1.5e-7 to 9e-7 on the various hidden state of the models.
The second NoteBook (Comparing-TF-and-PT-models-SQuAD.ipynb) compares the loss computed by the TensorFlow and the PyTorch models for identical initialization of the fine-tuning layer of the BertForQuestionAnswering and computes the standard deviation between them. In the given example, we get a standard deviation of 2.5e-7 between the models.
The third NoteBook (Comparing-TF-and-PT-models-MLM-NSP.ipynb) compares the predictions computed by the TensorFlow and the PyTorch models for masked token language modeling using the pre-trained masked language modeling model.

Please follow the instructions given in the notebooks to run and modify them.

Command-line interface

A command-line interface is provided to convert a TensorFlow checkpoint in a PyTorch dump of the BertForPreTraining class (see above).

You can convert any TensorFlow checkpoint for BERT (in particular the pre-trained models released by Google) in a PyTorch save file by using the ./pytorch_pretrained_bert/convert_tf_checkpoint_to_pytorch.py script.

This CLI takes as input a TensorFlow checkpoint (three files starting with bert_model.ckpt) and the associated configuration file (bert_config.json), and creates a PyTorch model for this configuration, loads the weights from the TensorFlow checkpoint in the PyTorch model and saves the resulting model in a standard PyTorch save file that can be imported using torch.load() (see examples in extract_features.py, run_classifier.py and run_squad.py).

You only need to run this conversion script once to get a PyTorch model. You can then disregard the TensorFlow checkpoint (the three files starting with bert_model.ckpt) but be sure to keep the configuration file (bert_config.json) and the vocabulary file (vocab.txt) as these are needed for the PyTorch model too.

To run this specific conversion script you will need to have TensorFlow and PyTorch installed (pip install tensorflow). The rest of the repository only requires PyTorch.

Here is an example of the conversion process for a pre-trained BERT-Base Uncased model:

export BERT_BASE_DIR=/path/to/bert/uncased_L-12_H-768_A-12

pytorch_pretrained_bert convert_tf_checkpoint_to_pytorch \
  $BERT_BASE_DIR/bert_model.ckpt \
  $BERT_BASE_DIR/bert_config.json \
  $BERT_BASE_DIR/pytorch_model.bin

You can download Google's pre-trained models for the conversion here.

TPU

TPU support and pretraining scripts

TPU are not supported by the current stable release of PyTorch (0.4.1). However, the next version of PyTorch (v1.0) should support training on TPU and is expected to be released soon (see the recent official announcement).

We will add TPU support when this next release is published.

The original TensorFlow code further comprises two scripts for pre-training BERT: create_pretraining_data.py and run_pretraining.py.

Since, pre-training BERT is a particularly expensive operation that basically requires one or several TPUs to be completed in a reasonable amout of time (see details here) we have decided to wait for the inclusion of TPU support in PyTorch to convert these pre-training scripts.

TriviaQA: A Large Scale Distantly Supervised Challenge Dataset for Reading Comprehension

This repo contains code for the paper Mandar Joshi, Eunsol Choi, Daniel Weld, Luke Zettlemoyer.

TriviaQA: A Large Scale Distantly Supervised Challenge Dataset for Reading Comprehension In Association for Computational Linguistics (ACL) 2017, Vancouver, Canada.

The data can be downloaded from the TriviaQA website.
Please contact Mandar Joshi (<first-name>90@cs.washington.edu) for suggestions and comments.

Requirements

General

Python 3. You should be able to run the evaluation scripts using Python 2.7 if you take care of unicode in utils.utils.py.
BiDAF requires Python 3 -- check the original repository for more details.

Python Packages

tensorflow (only if you want to run BiDAF, verified on r0.11)
nltk
tqdm

Evaluation

The dataset file parameter refers to files in the qa directory of the data (e.g., wikipedia-dev.json). For file format, check out the sample directory in the repo.

python3 -m evaluation.triviaqa_evaluation --dataset_file samples/triviaqa_sample.json --prediction_file samples/sample_predictions.json

Miscellaneous

If you have a SQuAD model and want to run on TriviaQA, please refer to utils.convert_to_squad_format.py

5d00d4f01818d5dce57a5c8d99a613b550629541

Theerit/bert-triviaqa

PyTorch Pretrained Bert

Content

Installation

With pip

From source

Overview

Usage

Doc

Loading Google AI's pre-trained weigths and PyTorch dump

PyTorch models

1. BertModel

2. BertForPreTraining

3. BertForMaskedLM

4. BertForNextSentencePrediction

5. BertForSequenceClassification

6. BertForMultipleChoice

7. BertForTokenClassification

8. BertForQuestionAnswering

Tokenizer: BertTokenizer

Optimizer: BertAdam

Examples

Training large models: introduction, tools and examples

Fine-tuning with BERT: running the examples

MRPC

SQuAD

SWAG

LM Fine-tuning

Fine-tuning BERT-large on GPUs

Notebooks

Command-line interface

TPU

Since, pre-training BERT is a particularly expensive operation that basically requires one or several TPUs to be completed in a reasonable amout of time (see details here) we have decided to wait for the inclusion of TPU support in PyTorch to convert these pre-training scripts.

TriviaQA: A Large Scale Distantly Supervised Challenge Dataset for Reading Comprehension

Requirements

General

Python Packages

Evaluation

Miscellaneous

1. `BertModel`

2. `BertForPreTraining`

3. `BertForMaskedLM`

4. `BertForNextSentencePrediction`

5. `BertForSequenceClassification`

6. `BertForMultipleChoice`

7. `BertForTokenClassification`

8. `BertForQuestionAnswering`

Tokenizer: `BertTokenizer`

Optimizer: `BertAdam`