ThizThizzyDizzy/nc-reactor-generator

[Overhaul Turbine] Caught exception processing input when placing a Stator.

Closed this issue · 2 comments

Planner Version: NC-Reactor-Plannerator-5.0.0-beta.5

Default Nuclearcraft config

Not entirely sure how to title this one, but I was making a turbine, 5x5x6 (5 tall, 5 deep, 6 wide), and had the rotor bearing, shaft, and all blades placed (all extreme alloy). However, the expansion was showing as bad, so I went to put a stator in to see what would happen, and as I placed the last piece, I got a mouse related error.

I was able to save the entire planner file, and it produces that same error every time you open the Turbine (as well as a second one).
ErroringTurbine.ncpf.json

And just in case you don't get the error, here's a pic
image

as well as the crash report
crash-Sat Jul 06 17-43-33 CDT 2024.txt

Steps to Reproduce

  1. Open the Planner
  2. Download my .ncpf file
  3. Load it into your planner
  4. Open the Turbine
  5. Error.

it's actually completing the turbine that crashes the turbine
grafik

This was fixed in f39f7b6