Update for both Display and Mainboard does not work
Closed this issue · 6 comments
Hi, I tried to update my Ender 3 S1Plus today and followed your steps exactly but when I try to update the display firmware the screen doesnt show anything for 10min exept for the backlight that is on (and the fan so I know the printer is actually on) and then after that I tried updating the Mainboard and the printer just booted like normal. I put the bin file in the folder which is correctly named and formated to fat32 with a size of 4096 and the size of the Volume is 2048 just like you described.
This is the back of my Display
and this is the Mainboard
- you have got a dwin display
- you have got a F4 mainboard
did you ever flashed anything with this sd card?
please show me a pic of your content of your sd card(s).
Thank you, for that Info. I have never flashed anything with this SD Card (I used a micro SD and an adapter for the mainboard)
ok the content of the cards looks correct.
please try with another card the same way you did with this card.
i have noticed that some cards simply dont work. one cant say if cheap or expensive.. for me the cheapest work best.
Okay sure will do that, I will report back, thanks for all your help already
Okay with a different SD card it worked like a charm, thanks. Now only one more question since the wiki isnt really populated yet, where can I find more information about what I am able to do with this firmware and what all the functions do. Also is Host Action Commands enabled?
i will close this as you can ask questions on the discord.
happy printing.