TurboWarp not working on Debian Bullseye (ARM64) Mali T720 GPU
abirabedinkhan opened this issue · 13 comments
When I try to open turbowarp it says "process crash: gpu crashed (11)".
when I run with turbowarp-desktop --no-sandbox it shows ->
https://github.com/TurboWarp/desktop/assets/67215274/cffeca2f-0fa9-4be6-85b7-f51ea1606c09
What do you see in the file ~/.config/turbowarp-desktop/tw_config.json and what hardware are you running this on?
$ cat ~/.config/turbowarp-desktop/tw_config.json
{
"v2": {
"dataVersion": 3,
"desktopVersion": "1.11.1",
"electronVersion": "29.3.0"
}
}
$ sudo lshw
Network interfaces
bongopc
description: Computer
product: Tanix TX6
serial: 82c000032765ae5b
width: 64 bits
capabilities: smp cp15_barrier setend swp tagged_addr_disabled
*-core
description: Motherboard
physical id: 0
*-cpu:0
description: CPU
product: cpu
physical id: 0
bus info: cpu@0
size: 1704MHz
capacity: 1704MHz
capabilities: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid cpufreq
*-cpu:1
description: CPU
product: cpu
physical id: 1
bus info: cpu@1
size: 1704MHz
capacity: 1704MHz
capabilities: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid cpufreq
*-cpu:2
description: CPU
product: cpu
physical id: 2
bus info: cpu@2
size: 1704MHz
capacity: 1704MHz
capabilities: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid cpufreq
*-cpu:3
description: CPU
product: cpu
physical id: 3
bus info: cpu@3
size: 1704MHz
capacity: 1704MHz
capabilities: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid cpufreq
*-memory
description: System memory
physical id: 4
size: 1984MiB
*-usbhost:0
product: xHCI Host Controller
vendor: Linux 5.15.27-station xhci-hcd
physical id: 2
bus info: usb@1
logical name: usb1
version: 5.15
capabilities: usb-2.00
configuration: driver=hub slots=1 speed=480Mbit/s
*-usbhost:1
product: xHCI Host Controller
vendor: Linux 5.15.27-station xhci-hcd
physical id: 3
bus info: usb@2
logical name: usb2
version: 5.15
capabilities: usb-3.00
configuration: driver=hub slots=1 speed=5000Mbit/s
*-usbhost:2
product: EHCI Host Controller
vendor: Linux 5.15.27-station ehci_hcd
physical id: 4
bus info: usb@3
logical name: usb3
version: 5.15
capabilities: usb-2.00
configuration: driver=hub slots=1 speed=480Mbit/s
*-usbhost:3
product: EHCI Host Controller
vendor: Linux 5.15.27-station ehci_hcd
physical id: 5
bus info: usb@4
logical name: usb4
version: 5.15
capabilities: usb-2.00
configuration: driver=hub slots=1 speed=480Mbit/s
*-usbhost:4
product: Generic Platform OHCI controller
vendor: Linux 5.15.27-station ohci_hcd
physical id: 6
bus info: usb@5
logical name: usb5
version: 5.15
capabilities: usb-1.10
configuration: driver=hub slots=1 speed=12Mbit/s
*-usbhost:5
product: Generic Platform OHCI controller
vendor: Linux 5.15.27-station ohci_hcd
physical id: 7
bus info: usb@6
logical name: usb6
version: 5.15
capabilities: usb-1.10
configuration: driver=hub slots=1 speed=12Mbit/s
*-usb
description: Mouse
product: Rapoo 2.4G Wireless Device
vendor: RAPOO
physical id: 1
bus info: usb@6:1
version: 1.10
capabilities: usb-2.00
configuration: driver=usbhid maxpower=100mA speed=12Mbit/s
*-usbhost:6
product: MUSB HDRC host driver
vendor: Linux 5.15.27-station musb-hcd
physical id: 1
bus info: usb@7
logical name: usb7
version: 5.15
capabilities: usb-2.00
configuration: driver=hub slots=1 speed=480Mbit/s
*-network:0
description: Ethernet interface
physical id: 8
logical name: eth0
serial: 02:03:27:65:ae:5b
capacity: 100Mbit/s
capabilities: ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=st_mac100 driverversion=Jan_2016 link=no multicast=yes port=twisted pair
*-network:1
description: Wireless interface
physical id: 9
logical name: wlan0
serial: 12:03:27:65:ae:5b
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=xradio_wlan driverversion=5.15.27-station firmware=N/A ip=10.0.1.109 link=yes multicast=yes wireless=IEEE 802.11
Processor: Allwinner H6
Grapics : Mali T720 GPU
I assume you've read https://wiki.debian.org/MaliGraphics. Does it work without --no-sandbox or in Chromium if you visit https://turbowarp.org/editor ?
You could try replacing ~/.config/turbowarp-desktop/tw_config.json with
{
"v2": {
"dataVersion": 3,
"desktopVersion": "1.11.1",
"electronVersion": "29.3.0",
"hardwareAcceleration": false
}
}but I'm not too hopeful
It works for me in a fresh Debian 11 VM so it's definitely something about those GPU drivers. That's all a lot of code that we don't control so not a whole further I can help
Its not woring on chromium but its working on firefox
after that I checked the GPU on the chromium the WebGL is not working
But on the firefox webGL is working perfectly fine.
If it doesn't work in Chromium then there's not much I can do since this is an Electron app :(
is there any alternative to Electron that is based on Firefox??
No :(