UofI-CDACS/fanuc_ros2_drivers

ROS2 Drivers for FANUC

FANUC ROS2 Drivers

Release 0.1.1

Table of Contents

1. About The Project
   • Built With
2. Getting Started
   • Prerequisites
   • Installation
3. Usage
4. Roadmap
5. License
6. Contact

About The Project

ROS2 Solution for FANUC robots

(back to top)

Built With

• 

(back to top)

Getting Started

Prerequisites

• pycomm

  pip3 install pycomm

• Put Fanuc TP programs on controller
  • 'ros2_eip_back.tp' needs to be running in the background
  • 'ros2_eip_mainv2.tp' runs in the foreground when you want to use ROS

Installation (Linux)

Create a ROS2 Workspace

1. Source ROS2 Environment

   source /opt/ros/humble/setup.bash

2. Create a new directory

   mkdir -p ~/ros2_ws/
   cd ~/ros2_ws/

3. Clone repo

   git clone https://github.com/UofI-CDACS/fanuc_ros2_drivers/ --branch v1.1

4. Resolve Dependencies

   rosdep install -i --from-path src --rosdistro humble -y

5. Build the workspace with colcon

   colcon build

   Full guide here: ROS2 Humble Documentation

   Installation Complete

(back to top)

Usage

Running Nodes

1. Open new terminal and go to workspace
2. Source overlay

   source install/setup.sh

3. Run launch

   ros2 launch launch/start.launch.py robot_name:=NAME_OF_ROBOT robot_ip:=0.0.0.0 # Parameters must be formated this way or the command will give you an error

• This script only works for one robot. If you need to start more than 1 robot, this should be done in mulitple terminals. (WIP)

Using Nodes

1. Open new terminal and go to workspace
2. Source overlay

   source install/setup.sh

3. Start using!

For more examples, please refer to the Documentation

(back to top)

Roadmap

• More ROS2 Packages

See the open issues for a full list of proposed features (and known issues).

(back to top)

License

Distributed under the GNU General Public License v3. See LICENSE.txt for more information.

(back to top)

Contact

Project Link: https://github.com/UniversityOfIdahoCDACS/FANUC-ROS2_Drivers

(back to top)