[Kingsong] the wheel signal settings are reset at start.

Question

[Kingsong] the wheel signal settings are reset at start.

Oxy976 opened this issue 3 years ago · 7 comments

Oxy976 commented 3 years ago

start weellog and wheel
change the speed at which signals will be sent
Turn off weellog and wheel
after the launch, the signals remain at their initial values, and not at those that were set by me.

Smartphone model and android version

Mi 9 SE, MIUI 12.5.1, android 11

EUC model

Kingsong KS14D

Answer 1 · 2021-09-15T18:49:10.000Z

In the past I have changed the speed for signals and they have been saved

Answer 2 · 2021-10-23T11:59:00.000Z

What do you mean changing the "speed at which signals will be sent"?

Answer 3 · 2021-10-26T18:21:24.000Z

Oxy976 commented 3 years ago

Answer 4 · 2021-10-27T07:10:54.000Z

oh, now I understand
I also have a 14D, gonna test this theory

Answer 5 · 2021-10-27T10:57:05.000Z

Issue confirmed, going to research this topic
What version is your firmware? I am on 2.09
And by the way, these signals are called "alarms", and they are triggered when specific speed is reached

Answer 6 · 2021-10-27T15:05:43.000Z

are you about the wheel firmware version? - 2.02

Answer 7 · 2021-10-27T16:11:49.000Z

Yes, thanks