/ESPhome-Ai-Thinker

ESPhome-Ai-Thinker

Flashing Requirements To flash esp32 cam you need a USB to TTL dongle.

Wiring

  • VCC -> 5v
  • GND -> GND
  • RXD -> UOT
  • TXD -> UOR

Instruction

When flashing:

- with the camera\TTL dongle unpluged
- short the reset button (GPIO0 to GND)
- I plugged in my board direct it my Hassio and used ESPhome Flasher to upload to board

You can also download ESPhome Flasher to use on Windows or MAC link https://github.com/esphome/esphome-flasher/releases