Will not connect
geos1200 opened this issue · 0 comments
geos1200 commented
Describe the bug
Newly installed
2 SE7600H-US
2 LG RESU 16
Modbus integration will not connect
I have confirmed that Modbus over TCP is enabled on the leader
Devices are connected via ethernet cable
Would it matter if my installer setup RS485-1 as multi device and RS485-2 as Solaredge leader
Both HA and inverter are on same network
Any help you can offer would be greatly appreciated
Expected behavior
connecting to modbus
Screenshots
No response
Diagnostic File
home-assistant_solaredge_modbus_multi_2024-04-06T23-40-36.747Z.log
Debug logs
No response
Home Assistant Version
2024.4.0
solaredge-modbus-multi Version
current
Installation Type
Core
Read the Instructions
- I have read https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki
- My configuration follows https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Configuration
- This issue is not about a template error (template errors should not be reported as an issue, read https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Template-Design-Notes)
Additional Context
No response