Storage Command Mode reset after 1 second
treynaer opened this issue · 1 comments
treynaer commented
Describe the bug
Storage Control Mode is set to remote control.
Storage Command Mode is set to Discharge to maximize export.
Storage Discharge Limit is set to 400W.
The inverter starts discharging of the battery for 1-2 seconds and reverts back to Maximize Self Consumption.
Expected behavior
The inverted needs to export for the duration of Storage Command Timeout.
Screenshots
No response
Diagnostic File
config_entry-solaredge_modbus_multi.json
Debug logs
No response
Home Assistant Version
2024.4.3
solaredge-modbus-multi Version
2.4.13
Installation Type
Container
Read the Instructions
- I have read https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki
- My configuration follows https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Configuration
- This issue is not about a template error (template errors should not be reported as an issue, read https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Template-Design-Notes)
Additional Context
No response
WillCodeForCats commented
This is not the integration.
Check the battery discussions for assistance or ask SolarEdge to un-enroll from whatever program causes this. I don't have batteries so I can't really help with battery questions.