Storage control modes are not reflected (anymore) in the adapter
mtbsteve opened this issue · 1 comments
mtbsteve commented
Describe the bug
The battery storage control mode settings are different between the SE app and the ModbusMulti adapter. If I recall correctly, the options were correct in an earlier 2.x version of the adapter.
Expected behavior
I would expect to have the same settings and configurations available including:
- maximize self consumption
- Time of use
- Backup only
- Manual control
Screenshots
Diagnostic File
config_entry-solaredge_modbus_multi-01J337KP50FCMME92VDYZC92EY.json
Debug logs
No response
Home Assistant Version
24.9.2
solaredge-modbus-multi Version
3.0.0
Installation Type
HAOS
Read the Instructions
- My configuration follows https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Configuration
- I have read the Known Issues https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Known-Issues
- This issue is not about a template error (do not report template errors, read https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Template-Design-Notes)
Additional Context
No response
WillCodeForCats commented
Diagnostic file looks fine to me.
There are no changes to control mode setting names in code.