Xinyuan-LilyGO/LilyGo-T-Relay

Issues

• Installing tasmota in T-RelayS3

  #21 opened a year ago by Nachorov027
  6

• ESPHome example of T-Relay 5V 8 Channel Relay and T-Relay W5500 Shield

  #23 opened a year ago by Misiu
  2

• T-Relay relay specs

  #36 opened 5 months ago by Uthrom
  3

• info about PS RAM

  #32 opened 5 months ago by freiregtr
  1

• Testing T-Relay W5500 Shield - discovery working but no LEDs (LinkOFF)

  #25 opened 5 months ago by linkedupbits
  1

• External pin setted with input pull-up is not working.

  #33 opened 5 months ago by DAZABAMUKER
  2

• T-relay-s3 (H629) 6 relay board simple coding & pin out

  #34 opened 5 months ago by Maxheadroom831
  1

• LilyGo-T-Relay w5500: Which hardware SPI Pins?

  #28 opened 5 months ago by JFLSeoul
  1

• Movement and ghost switching

  #35 opened 6 months ago by charlesnoble
  4

• which tft module size? 2.8" or 2.4"? (t-relayS3)

  #31 opened 7 months ago by groovejumper
  1

• LilyGo T-Relay(6) S3 - pin assigments in documentation doesnt match schematic/reallity

  #30 opened 8 months ago by LordRafa
  1

• T-Relay S3 Chain in ESP Home

  #22 opened a year ago by Misiu
  9

• Prevent relay trigger on boot or reset with esphome code

  #24 opened a year ago by davidusb-geek
  17

• LilyGo T-Relay(6) S3 - connect to w5500 Ethernet shield

  #29 opened 8 months ago by szab0lcs
  1

• T-relay s3 with expansion.

  #27 opened 10 months ago by fgastald
  2

• Configure the pins for I2C

  #18 opened 2 years ago by rogeriopedroso
  5

• Internal PCF8563 not incrementing with T-Relay S3 [H629]

  #26 opened 10 months ago by Olli69
  12

• Posible to use T-Relay with 4G module?

  #20 opened a year ago by dzungpv
  1

• ESP Easy will do a hard (config) reset when connected via USB-C w/o Serial adapter

  #19 opened 2 years ago by KaiDK
  3

• Pin swap required on the connector

  #9 opened 2 years ago by X-Ryl669
  33

• 5v access

  #15 opened 2 years ago by rosbeef
  1

• interactivewebserver example

  #17 opened 2 years ago by FredoTheGreat
  1

• Can't find LilyGo-T-Relay on VSCode PlatformIO

  #14 opened 2 years ago by PortRoyale
  1

• Infinite boot loop after binary upload

  #16 opened 2 years ago by N6RDV
  1

• PIN SELECTION

  #13 opened 2 years ago by iwoodcock1952
  1

• UART on the T-Relay (4) board?

  #12 opened 2 years ago by wkearney99
  1

• Will you offer these on LilyGO Amazon store?

  #10 opened 2 years ago by zorrobyte
  5

• How to upload with USBtoSerial CH340

  #8 opened 3 years ago by garudaonekh
  4

• Please remove

  #11 opened 2 years ago by dac2020
  0

• What is the correct GPIO pin for K4 relay

  #4 opened 3 years ago by tichaonax
  2

• What is the maximum current rating for the relay ?

  #3 opened 3 years ago by X-Ryl669
  5

• Is it possible to add external anten for Wifi ?

  #2 opened 3 years ago by David-2D3FE9
  2