T-Deck 433 Mhz Bricked
Txcspm opened this issue · 2 comments
Txcspm commented
T-Deck 433 Mhz stuck in boot loop, bricked during flashing to newest version and will not turn respond.
Blue LED above RW1 turns on when powered by an external power source, but not battery. Computer will not recognize com port when plugged in and nothing appears on screen.
lewisxhe commented
Try to hold down the trackball on the front, press it down, and then plug in the USB to see if the port displays normally.
Txcspm commented
No luck unfortunately. Still not recognized as a com port or UART bridge
…On Mon, Mar 25, 2024 at 20:46 Lewis He ***@***.***> wrote:
Try to hold down the trackball on the front, press it down, and then plug
in the USB to see if the port displays normally.
—
Reply to this email directly, view it on GitHub
<#21 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AZGKDYTPDKJI3Y5T5BGPKNDY2DHQDAVCNFSM6AAAAABFD2RBV6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMJZGIZTOOBYHE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>