Pinned Repositories
12V-Support
The 12V Support Circuit switches between internal and external +12V power, and switches power to the +12V rail.
aaronbeekay.github.io
aaronbeekay.info - portfolio site.
Adafruit_CircuitPython_PCF8523
Adafruit CircuitPython drivers for the PCF8523 realtime clock.
Battery-balancer
Hardware, software, and model for a battery charger/balancer.
Battery-Interface-Module
Battery Interface Module is a 36-cell lithium battery cell monitor with built-in balancing and CAN communications.
BCW17-Motorcycle-Driver-Assist
camper-host
Software that manages sensor data on my cyber-camper.
ina233
An Arduino repository for the TI INA233 shunt current/voltage monitor
Magic-CAN-Node
The Magic CAN Node is a general-purpose analog sensor interface designed for use onboard Buckeye Current's racing motorcycles.
shunt-current-monitor
A shunt resistor-mounted current/energy monitor based on the TI INA233 and Teensy 3.2.
aaronbeekay's Repositories
aaronbeekay/Battery-balancer
Hardware, software, and model for a battery charger/balancer.
aaronbeekay/BCW17-Motorcycle-Driver-Assist
aaronbeekay/ina233
An Arduino repository for the TI INA233 shunt current/voltage monitor
aaronbeekay/Magic-CAN-Node
The Magic CAN Node is a general-purpose analog sensor interface designed for use onboard Buckeye Current's racing motorcycles.
aaronbeekay/shunt-current-monitor
A shunt resistor-mounted current/energy monitor based on the TI INA233 and Teensy 3.2.
aaronbeekay/aaronbeekay.github.io
aaronbeekay.info - portfolio site.
aaronbeekay/Adafruit_CircuitPython_PCF8523
Adafruit CircuitPython drivers for the PCF8523 realtime clock.
aaronbeekay/Battery-Interface-Module
Battery Interface Module is a 36-cell lithium battery cell monitor with built-in balancing and CAN communications.
aaronbeekay/camper-host
Software that manages sensor data on my cyber-camper.
aaronbeekay/CANCorder-UI
aaronbeekay/Charger-AC-disconnect
A little utility board that switches a relay based on the presence of an AC voltage, plus a delay.
aaronbeekay/Component-libraries
EAGLE component libraries for use in the team's electrical hardware projects.
aaronbeekay/compressor-control
An excessively-fancy controller for an air compressor pump.
aaronbeekay/coop-startup-cost
aaronbeekay/ebay-listing-templates
A set of ebay listing templates in bootstrap
aaronbeekay/iaq-monitor-firmware
Firmware for little indoor air quality project
aaronbeekay/imessage-analysis
A bunch of junk code to analyze iMessage databases.
aaronbeekay/lunchroulette-landing
A web app landing page theme created by Start Bootstrap
aaronbeekay/Magic-Camper-Firmware
Firmware for the Magic Camper Node
aaronbeekay/magic-camper-node
General-purpose CAN node, based on Teensy 3.2
aaronbeekay/neveragaindottech.github.io
Source files for the neveragain.tech site
aaronbeekay/obsidian-journal-renderer
it's a renderer so I can see my journal in a nice timeline
aaronbeekay/RTOS-testing
aaronbeekay/shopify-ebay-ui
aaronbeekay/shopify-ebay-updater
aaronbeekay/slirp-jug
aaronbeekay/slirp-up
aaronbeekay/Synology-NAS-monitoring
only snmp and telegraf
aaronbeekay/Utility-hardware
Adapters, breakouts, and other convenient electrical modules.
aaronbeekay/Victron.Arduino-ESP8266
Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before adding the data.