abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.
CGPL-3.0
Issues
- 5
- 3
Improving sample rate for a specific protocol.
#56 opened by hanetzer - 1
- 4
anyone sell full board?
#53 opened by felixn-unity - 4
Installing on 5.x
#50 opened by rherban - 2
installed on laptop, wasn't supposed to was I?
#54 opened by Randy413 - 3
PocketBeagle support
#28 opened by AnthonyDiGirolamo - 0
explain the BeagleLogic kernel module
#52 opened by Rkk-10 - 12
- 5
BeagleLogic couldn't load
#41 opened by aposstar - 2
BeagleLogic not working with 4.9.78-ti-r94
#40 opened by majesty-dump - 5
Trade speed for inputs?
#8 opened by jedahan - 3
System image link is broken
#48 opened by xouillet - 2
from_bl_irq_1 lost IRQs
#47 opened by acf-bwl - 0
Pulse View
#46 opened by chrissnow - 0
/dev/beaglelogic at system boot
#45 opened by electronicJohn - 1
Web Interface
#44 opened by andersoncastellar100 - 2
A question about prudaq-ch0.asm driver
#35 opened by arashebadi - 3
Use PRU0 for input
#13 opened by NiHaoMike - 1
Nonblocking mode in the testapp, does it work?
#27 opened by Vagabond - 5
- 2
ADC sampling
#22 opened by kzoltaan - 3
Pipe the data into python program
#20 opened by fwndz - 10
- 2
error in beaglelogic_map_and_submit_all_buffers()
#34 opened by mixaz - 2
Missing Mutex unlock
#25 opened by codecore - 2
Add PulseView to image
#30 opened by buzmeg - 1
- 6
sigrok-cli tcp connection?
#36 opened by xiongyihui - 2
Data Capture trouble shooting
#33 opened by tchristle - 1
- 9
Upgrading prebuilt image
#26 opened by Vagabond - 14
Compatible with Beaglebone Black Wireless?
#17 opened by dlee1579 - 4
input voltage to the BBB
#16 opened by skypuppy - 5
functionality request
#15 opened by skypuppy - 8
Port to Kernel 4.4 and above
#19 opened by abhishek-kakkar - 0
install.sh does not complete properly
#23 opened by D-L-F - 1
BOM for BeagleLogic Cape 1.1?
#11 opened by pdp7 - 2
Only 8 channels on BeagleLogic system image
#14 opened by antoniomolram - 3
- 1
- 3
Slow memory access on CPU side?
#10 opened by credentiality - 24
Building sigrok?
#3 opened by nmaas87 - 1
Only 8/14 channels accessible via the web interface; sigrok-cli exits with error code 1 otherwise
#4 opened by abhishek-kakkar - 6
PRU1 fails to load with bone70 OS
#7 opened by bcr - 1
Building sigrok on beaglebone
#5 opened by codehero - 3
kicad lib paths
#6 opened by macsimski - 2
Getting started - does not work
#2 opened by nmaas87