[REQUEST] Pro S3
brentru opened this issue · 2 comments
Name of Board
ProS3 - ESP32-S3 Development Board by Unexpected Maker
Board Architecture (i.e: SAMD51, ESP32-S2, ESP32, ...)
ESP32-S3
Hardware URL
https://www.adafruit.com/product/5401
Pinout URL
A link to a pinout image, or the board's pin definitions
Additional context
Add any other context about the board request here.
This issue is marked for Hacktoberfest 2022. If you are participating in Hacktoberfest and want to take on this issue, please first fully read through the guide for adding a new board to Adafruit IO WipperSnapper.
First, make sure you have the required hardware.
Next, for this issue, you must add both the board definition and update WipperSnapper firmware to support this new board.
If you have any questions, comments, or concerns, please feel free to tag me in the comments here, or in your pull request for review.
Happy Hackin'!
This issue is marked for Hacktoberfest 2022. If you are participating in Hacktoberfest and want to take on this issue, please first fully read through the guide for adding a new board to Adafruit IO WipperSnapper.
First, make sure you have the required hardware.
Next, for this issue, you must add both the board definition and update WipperSnapper firmware to support this new board.
If you have any questions, comments, or concerns, please feel free to tag me in the comments here, or in your pull request for review.
Happy Hackin'!