Rotary sensor STL missing
keesvanbemmel opened this issue · 4 comments
Hi!
The rotary mount STL seems missing.
On this page: https://github.com/aenniw/ARDUINO/blob/master/skarsta/docs/sensor-rot.md
Rot-mount STL links to hall-mount.
Should I use that one?
This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 5 days.
Unfortunately I can confirm that the linked hall-mount does not seem to match the required rot-mount.
It would be great if the correct STL could be uploaded and linked in the documentation.
@aenniw
Regardless, I would like to say that I am very excited about the work that went into this project. Thank you very much!
@keesvanbemmel The link in the docs is correct despite that it points to hal-mount.stl as the mount parts are identical for both of them, and as long as part idmatches they should be compatible....
@trewbene what parts doesn't match each other? If its regarding the mount <-> cover it should be caused by tolerances that could be tweaked...
Sorry for the late reply. Somehow it didn't seem to fit from the STL files.
Now that I have printed the parts, they fit together as you described.