M3-6mm seems to short for motor-sleeve in case_motor-v2

Question

M3-6mm seems to short for motor-sleeve in case_motor-v2

sterin opened this issue 2 years ago · 2 comments

The shopping lists suggests 12 M3-6mm bolts for securing the sleeve to the motor. However, the face of the sleeve is over 6mm, so the bolts are way too short.

~~Was the original intention 6 x M3-12mm bolts?~~

Answer 1 · 2022-07-01T07:38:40.000Z

I used 10mm for the sleeve without problem (chamfer needed for that part), and for the others screws for the motor.

Answer 2 · 2022-08-01T01:24:50.000Z

This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 5 days.