Print Setting?
LostInIgnorance opened this issue · 5 comments
Can you add the print settings you are using to the STL file folder please
Hello, sorry for my late response. I don't know if you still need it. However what I use for the bottom part is:
No support
Infill: 20%
Line Width: 0.44 mm
Layer height: 0.2 mm
For the top part you can add supports for the highest point of the dome
If you need some particular parameter, please ask me
@ale1800 Thank you for that information as I always seem to be having issues with the locator pins on the bottom and having these settings should help.
The other question I have is what program was used to create the base/top as I would like to modify the original to allow wall mounting from the base, but I think I need the original files. Also, could you share the originals?
@LostInIgnorance I used shapr3d to design the enclosure. I can share the step files or even the "native" ones if you use the same program
@LostInIgnorance I uploaded here everything
@ale1800 I don't have shapr3d and I am not sure how to modify the same base, but with a wall mount option (just a couple of screw holes on a bracket/extended wall). The USB C cord I am using is below so I don't need much space in the back for the USB C connection.