Model unknown Manuf.: ABB - Model: -3P46-

Question

Model unknown Manuf.: ABB - Model: -3P46-

Claudio1L opened this issue 2 years ago · 6 comments

After long time running fine, today started loggin this message of model unknown

2022-10-14 13:48:43.663 ERROR (MainThread) [custom_components.abb_powerone_pvi_sunspec] (opt_comm_model) Model unknown, report to @alexdelprete on the forum the following data: Manuf.: ABB - Model: -3P46- - Options: 0x03ED/0xFF69/ - OptModel: 0x03ED/0xFF69/ - OptModelInt: 3

Answer 1 · 2022-10-14T19:42:36.000Z

Claudio, it's not a real error, did you read the message? :)

I put the error on purpose to ask users to provide the real model of the inverter associated with Option Model (in your case it's 3) so I can add it to the list of inverters known to the integration.

So, can you tell me the specific model of your inverter? In next update you'll find the correct model and no error in the log.

Ciao.

Answer 2 · 2022-10-14T20:11:13.000Z

Thanks The mode il UNO-DM-4.6-TL-PLUS Thanks Claudio

…

On 14 Oct 2022, at 21:42, Alessandro Del Prete ***@***.***> wrote: Claudio, it's not a real error, did you read the message? :) I put the error on purpose to ask users to provide the real model of the inverter associated with Option Model (in your case it's 3) so I can add it to the list of inverters known to the integration. So, can you tell me the specific model of your inverter? In next update you'll find the correct model and no error in the log. Ciao. — Reply to this email directly, view it on GitHub <#32 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AXK6MPXR7XZSMM7OZP5R6ALWDGZTNANCNFSM6AAAAAARFNXRMQ>. You are receiving this because you authored the thread.

Answer 3 · 2022-10-14T20:25:05.000Z

Added your model and released new version. If you upgrade the component, you should see the model in the sensors list, instead of 0x03ED/0xFF69.

Let me know if it works.

Answer 4 · 2022-10-14T20:27:18.000Z

Thank you. I’m worried to reboot due to the other issue I opened today, the one relate do pymodbus

…

On 14 Oct 2022, at 22:25, Alessandro Del Prete ***@***.***> wrote: Added your model and released new version. If you upgrade the component, you should see the model in the sensors list, instead of 0x03ED/0xFF69. Let me know if it works. — Reply to this email directly, view it on GitHub <#32 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AXK6MPQOSEA7SNU7JOPF3XTWDG6SXANCNFSM6AAAAAARFNXRMQ>. You are receiving this because you authored the thread.

Answer 5 · 2022-10-14T20:34:26.000Z

Thank you. I’m worried to reboot due to the other issue I opened today, the one relate do pymodbus

Sorry, I didn't check that issue. I'll answer there. Closing this issue.

Answer 6 · 2022-10-14T20:37:14.000Z

Just tested doing a snapshot before reboot and nothing. Had to restore the snapshot because of the issue #31 preventing from load the integration

…

On 14 Oct 2022, at 22:34, Alessandro Del Prete ***@***.***> wrote: Thank you. I’m worried to reboot due to the other issue I opened today, the one relate do pymodbus Sorry, I didn't check that issue. I'll answer there. Closing this issue. — Reply to this email directly, view it on GitHub <#32 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AXK6MPXKIDPPD4MGIQMT7WTWDG7V3ANCNFSM6AAAAAARFNXRMQ>. You are receiving this because you authored the thread.