alexreinert/piVCCU

HmIP-RFUSB with HM-MOD-RPI-PCB together

Sirmike2 opened this issue · 3 comments

Sirmike2 commented

Hi,

I wanted to use the HmIP-RFUSB with HM-MOD-RPI-PCB together on a raspberry Pi 4, but the piVCCU only use the HM-MOD-RPI-PCB adapter. Both adapters are recognized as /dev/raw-uart and /dev/raw-uart1.

Is it possible to use both adapter with piVCCU3 or is this not possible?

Thanks for answering!

BR

alexreinert commented

Both modules are capable of dual Copro mode, why should when two modules be used?
And because of the dual copro, it is not possible two use both modules as this would require two instances of multimacd, which is not possible.

Sirmike2 commented

Ah ok, thanks for the answer.

I have a lot of old RF Homematic equipment and some new HmIP stuff. For these things I need a bigger range, that is why I am using the old HM-MOD-RPI-PCB with an external antenna. I only need the HmIP-RFUSB for the HmIP-wired system. The HM-MOD-RPI-PCB could not handle the new wired system, only the normal HmIP equipment.
I think the USB Stick will not have the same range, that I will get all my devices.
That was the reason, why I would like to use both of them.

BR

stale commented

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.