E: Sub-process /usr/bin/dpkg returned an error code (1)
HerrFrodo1 opened this issue · 0 comments
Hallo Herr Reinert,
ich habe folgendes Problem:
pi@raspberrypi:~ $ sudo apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue? [Y/n] y Setting up pivccu-modules-raspberrypi (2.0-19) ... sed: can't read /var/lib/piVCCU/dtb/config.txt: No such file or directory dpkg: error processing package pivccu-modules-raspberrypi (--configure): installed pivccu-modules-raspberrypi package post-installation script subprocess returned error exit status 2 Errors were encountered while processing: pivccu-modules-raspberrypi E: Sub-process /usr/bin/dpkg returned an error code (1)
pi@raspberrypi:~ $ sudo pivccu-info piVCCU version: 3.73.9-87 OS: Debian GNU/Linux 11 (bullseye) Kernel: 6.1.21-v8+ aarch64 Kernel modules: Available Raw UART dev: Available Rasp.Pi UART: Assigned to GPIO pins HMRF Hardware: RPI-RF-MOD Connected via: GPIO@fe201000.serial (/dev/raw-uart) Board serial: 5A4993EE43 Radio MAC: 0xFFEE43 HMIP Hardware: RPI-RF-MOD Connected via: GPIO@fe201000.serial (/dev/raw-uart) SGTIN: 3014F711A0001F5A4993EE43 Radio MAC: 0xBAE6D9 State: RUNNING PID: 453578 IP: 192.168.1.103 IP: 2003:f1:af35:700:28a3:69ff:fe37:5efa Link: vethpivccu TX bytes: 42.48 MiB RX bytes: 33.24 MiB Total bytes: 75.72 MiB
`ioBroker nodejs updater 2023-10-13
|
| Recommended nodejs-version is: 18.19.1
| Checking your installation now. Please be patient!
|
| Your current setup is:
| /usr/bin/node v18.17.1
| /usr/bin/npm 9.6.7
| /usr/bin/npx 9.6.7
| /usr/bin/corepack 0.18.0
|
| We found these nodejs versions available for installation:
|
| nodejs:
| Installed: 18.17.1-deb-1nodesource1
| Candidate: 18.17.1-deb-1nodesource1
| Version table:
| *** 18.17.1-deb-1nodesource1 500
| 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
| 100 /var/lib/dpkg/status
| 12.22.12dfsg-1deb11u4 500
| 500 http://deb.debian.org/debian bullseye/main arm64 Packages
| 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
|
|
|
| Nothing to do - Your installation is using the correct paths.
|
| You are running nodejs v18.17.1. Do you want to install recommended version 18.19.1?
|
| Press to continue or any other key to quit
| Trying to update your installation now. Please be patient.
| find: '/var/lib/lxcfs/cgroup': Input/output error
| rm: cannot remove '/backup/raspberrypi/raspberrypi-rsync-backup-20230921-180330/sda2/usr/share/keyrings/nodesource.gpg'$'\n''/backup/raspberrypi/raspberrypi-rsync-backup-20231001-020001/sda2/usr/share/keyrings/nodesource.gpg'$'\n''/backup/raspberrypi/raspberrypi-rsync-backup-20231101-020001/sda2/usr/share/keyrings/nodesource.gpg'$'\n''/backup/raspberrypi/raspberrypi-rsync-backup-20240207-020001/sda2/usr/share/keyrings/nodesource.gpg'$'\n''/backup/raspberrypi/raspberrypi-rsync-backup-20240212-020001/sda2/usr/share/keyrings/nodesource.gpg'$'\n''/backup/raspberrypi/raspberrypi-rsync-backup-20240216-020001/sda2/usr/share/keyrings/nodesource.gpg'$'\n''/backup/raspberrypi/raspberrypi-rsync-backup-20240217-020001/sda2/usr/share/keyrings/nodesource.gpg'$'\n''/backup/raspberrypi/raspberrypi-rsync-backup-20240218-020001/sda2/usr/share/keyrings/nodesource.gpg'$'\n''/backup/raspberrypi/raspberrypi-rsync-backup-20240219-020001/sda2/usr/share/keyrings/nodesource.gpg'$'\n''/backup/raspberrypi/raspberrypi-rsync-backup-20240220-020001/sda2/usr/share/keyrings/nodesource.gpg'$'\n''/backup/raspberrypi/raspberrypi-rsync-backup-20240221-020002/sda2/usr/share/keyrings/nodesource.gpg'$'\n''/backup/raspberrypi/raspberrypi-rsync-backup-20240222-020002/sda2/usr/share/keyrings/nodesource.gpg'$'\n''/usr/share/keyrings/nodesource.gpg': No such file or directory
| Waiting for ioBroker to shut down - Give me a minute...
| ############################################################
|
| *** These repos are active on your system:
| Hit:1 http://deb.debian.org/debian bullseye InRelease
| Get:2 http://deb.debian.org/debian bullseye-updates InRelease [44.1 kB]
| Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
| Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
| Hit:5 https://repos.influxdata.com/debian stable InRelease
| Hit:6 https://repos.influxdata.com/debian bullseye InRelease
| Hit:7 https://apt.pivccu.de/piVCCU stable InRelease
| Fetched 44.1 kB in 2s (27.9 kB/s)
| Reading package lists... Done
|
| *** Installing ca-certificates, curl and gnupg, just in case they are missing.
| Setting up pivccu-modules-raspberrypi (2.0-19) ...
| sed: can't read /var/lib/piVCCU/dtb/config.txt: No such file or directory
| dpkg: error processing package pivccu-modules-raspberrypi (--configure):
| installed pivccu-modules-raspberrypi package post-installation script subprocess returned error exit status 2
| Errors were encountered while processing:
| pivccu-modules-raspberrypi
| E: Sub-process /usr/bin/dpkg returned an error code (1)
| {1}
| *** Creating new /etc/apt/sources.list.d/nodesource.list and pinning source
| {1}
| deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x nodistro main
| Package: nodejs
| Pin: origin deb.nodesource.com
| Pin-Priority: 1001
| {1}
| *** These repos are active after the adjustments:
| Hit:1 http://deb.debian.org/debian bullseye InRelease
| Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
| Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease
| Hit:4 https://repos.influxdata.com/debian stable InRelease
| Hit:5 http://security.debian.org/debian-security bullseye-security InRelease
| Hit:6 https://repos.influxdata.com/debian bullseye InRelease
| Hit:7 https://apt.pivccu.de/piVCCU stable InRelease
| Get:8 https://deb.nodesource.com/node_18.x nodistro InRelease [12.1 kB]
| Get:9 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages [7416 B]
| Get:10 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages [7392 B]
| Fetched 26.9 kB in 2s (15.3 kB/s)
| Reading package lists... Done
| {1}
| Installing the recommended nodejs version now!
| {1}
| /home/iobroker/.nodejs-update.sh: line 329: [: : integer expression expected
| /home/iobroker/.nodejs-update.sh: line 346: [: : integer expression expected
| Installing the recommended nodejs version!
| (Reading database ... 91705 files and directories currently installed.)
| Preparing to unpack .../nodejs_18.19.1-1nodesource1_arm64.deb ...
| Detected old npm client, removing...
| Unpacking nodejs (18.19.1-1nodesource1) over (18.17.1-deb-1nodesource1) ...
| Setting up nodejs (18.19.1-1nodesource1) ...
| Setting up pivccu-modules-raspberrypi (2.0-19) ...
| sed: can't read /var/lib/piVCCU/dtb/config.txt: No such file or directory
| dpkg: error processing package pivccu-modules-raspberrypi (--configure):
| installed pivccu-modules-raspberrypi package post-installation script subprocess returned error exit status 2
| Processing triggers for man-db (2.9.4-2) ...
| Errors were encountered while processing:
| pivccu-modules-raspberrypi
| E: Sub-process /usr/bin/dpkg returned an error code (1)
|
| We tried our best to update or fix your nodejs. Please run iob diag again to verify.
|
| *** RESTARTING ioBroker NOW! ***
| Please refresh or restart your browser in a few moments.
|
| pi@raspberrypi:~ $`
Was kann das sein?
Besten Dank!